--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/planemo/lib/python3.7/site-packages/future/backports/urllib/parse.py	Fri Jul 31 00:18:57 2020 -0400
@@ -0,0 +1,991 @@
+"""
+Ported using Python-Future from the Python 3.3 standard library.
+
+Parse (absolute and relative) URLs.
+
+urlparse module is based upon the following RFC specifications.
+
+RFC 3986 (STD66): "Uniform Resource Identifiers" by T. Berners-Lee, R. Fielding
+and L.  Masinter, January 2005.
+
+RFC 2732 : "Format for Literal IPv6 Addresses in URL's by R.Hinden, B.Carpenter
+and L.Masinter, December 1999.
+
+RFC 2396:  "Uniform Resource Identifiers (URI)": Generic Syntax by T.
+Berners-Lee, R. Fielding, and L. Masinter, August 1998.
+
+RFC 2368: "The mailto URL scheme", by P.Hoffman , L Masinter, J. Zawinski, July 1998.
+
+RFC 1808: "Relative Uniform Resource Locators", by R. Fielding, UC Irvine, June
+1995.
+
+RFC 1738: "Uniform Resource Locators (URL)" by T. Berners-Lee, L. Masinter, M.
+McCahill, December 1994
+
+RFC 3986 is considered the current standard and any future changes to
+urlparse module should conform with it.  The urlparse module is
+currently not entirely compliant with this RFC due to defacto
+scenarios for parsing, and for backward compatibility purposes, some
+parsing quirks from older RFCs are retained. The testcases in
+test_urlparse.py provides a good indicator of parsing behavior.
+"""
+from __future__ import absolute_import, division, unicode_literals
+from future.builtins import bytes, chr, dict, int, range, str
+from future.utils import raise_with_traceback
+
+import re
+import sys
+import collections
+
+__all__ = ["urlparse", "urlunparse", "urljoin", "urldefrag",
+           "urlsplit", "urlunsplit", "urlencode", "parse_qs",
+           "parse_qsl", "quote", "quote_plus", "quote_from_bytes",
+           "unquote", "unquote_plus", "unquote_to_bytes"]
+
+# A classification of schemes ('' means apply by default)
+uses_relative = ['ftp', 'http', 'gopher', 'nntp', 'imap',
+                 'wais', 'file', 'https', 'shttp', 'mms',
+                 'prospero', 'rtsp', 'rtspu', '', 'sftp',
+                 'svn', 'svn+ssh']
+uses_netloc = ['ftp', 'http', 'gopher', 'nntp', 'telnet',
+               'imap', 'wais', 'file', 'mms', 'https', 'shttp',
+               'snews', 'prospero', 'rtsp', 'rtspu', 'rsync', '',
+               'svn', 'svn+ssh', 'sftp', 'nfs', 'git', 'git+ssh']
+uses_params = ['ftp', 'hdl', 'prospero', 'http', 'imap',
+               'https', 'shttp', 'rtsp', 'rtspu', 'sip', 'sips',
+               'mms', '', 'sftp', 'tel']
+
+# These are not actually used anymore, but should stay for backwards
+# compatibility.  (They are undocumented, but have a public-looking name.)
+non_hierarchical = ['gopher', 'hdl', 'mailto', 'news',
+                    'telnet', 'wais', 'imap', 'snews', 'sip', 'sips']
+uses_query = ['http', 'wais', 'imap', 'https', 'shttp', 'mms',
+              'gopher', 'rtsp', 'rtspu', 'sip', 'sips', '']
+uses_fragment = ['ftp', 'hdl', 'http', 'gopher', 'news',
+                 'nntp', 'wais', 'https', 'shttp', 'snews',
+                 'file', 'prospero', '']
+
+# Characters valid in scheme names
+scheme_chars = ('abcdefghijklmnopqrstuvwxyz'
+                'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+                '0123456789'
+                '+-.')
+
+# XXX: Consider replacing with functools.lru_cache
+MAX_CACHE_SIZE = 20
+_parse_cache = {}
+
+def clear_cache():
+    """Clear the parse cache and the quoters cache."""
+    _parse_cache.clear()
+    _safe_quoters.clear()
+
+
+# Helpers for bytes handling
+# For 3.2, we deliberately require applications that
+# handle improperly quoted URLs to do their own
+# decoding and encoding. If valid use cases are
+# presented, we may relax this by using latin-1
+# decoding internally for 3.3
+_implicit_encoding = 'ascii'
+_implicit_errors = 'strict'
+
+def _noop(obj):
+    return obj
+
+def _encode_result(obj, encoding=_implicit_encoding,
+                        errors=_implicit_errors):
+    return obj.encode(encoding, errors)
+
+def _decode_args(args, encoding=_implicit_encoding,
+                       errors=_implicit_errors):
+    return tuple(x.decode(encoding, errors) if x else '' for x in args)
+
+def _coerce_args(*args):
+    # Invokes decode if necessary to create str args
+    # and returns the coerced inputs along with
+    # an appropriate result coercion function
+    #   - noop for str inputs
+    #   - encoding function otherwise
+    str_input = isinstance(args[0], str)
+    for arg in args[1:]:
+        # We special-case the empty string to support the
+        # "scheme=''" default argument to some functions
+        if arg and isinstance(arg, str) != str_input:
+            raise TypeError("Cannot mix str and non-str arguments")
+    if str_input:
+        return args + (_noop,)
+    return _decode_args(args) + (_encode_result,)
+
+# Result objects are more helpful than simple tuples
+class _ResultMixinStr(object):
+    """Standard approach to encoding parsed results from str to bytes"""
+    __slots__ = ()
+
+    def encode(self, encoding='ascii', errors='strict'):
+        return self._encoded_counterpart(*(x.encode(encoding, errors) for x in self))
+
+
+class _ResultMixinBytes(object):
+    """Standard approach to decoding parsed results from bytes to str"""
+    __slots__ = ()
+
+    def decode(self, encoding='ascii', errors='strict'):
+        return self._decoded_counterpart(*(x.decode(encoding, errors) for x in self))
+
+
+class _NetlocResultMixinBase(object):
+    """Shared methods for the parsed result objects containing a netloc element"""
+    __slots__ = ()
+
+    @property
+    def username(self):
+        return self._userinfo[0]
+
+    @property
+    def password(self):
+        return self._userinfo[1]
+
+    @property
+    def hostname(self):
+        hostname = self._hostinfo[0]
+        if not hostname:
+            hostname = None
+        elif hostname is not None:
+            hostname = hostname.lower()
+        return hostname
+
+    @property
+    def port(self):
+        port = self._hostinfo[1]
+        if port is not None:
+            port = int(port, 10)
+            # Return None on an illegal port
+            if not ( 0 <= port <= 65535):
+                return None
+        return port
+
+
+class _NetlocResultMixinStr(_NetlocResultMixinBase, _ResultMixinStr):
+    __slots__ = ()
+
+    @property
+    def _userinfo(self):
+        netloc = self.netloc
+        userinfo, have_info, hostinfo = netloc.rpartition('@')
+        if have_info:
+            username, have_password, password = userinfo.partition(':')
+            if not have_password:
+                password = None
+        else:
+            username = password = None
+        return username, password
+
+    @property
+    def _hostinfo(self):
+        netloc = self.netloc
+        _, _, hostinfo = netloc.rpartition('@')
+        _, have_open_br, bracketed = hostinfo.partition('[')
+        if have_open_br:
+            hostname, _, port = bracketed.partition(']')
+            _, have_port, port = port.partition(':')
+        else:
+            hostname, have_port, port = hostinfo.partition(':')
+        if not have_port:
+            port = None
+        return hostname, port
+
+
+class _NetlocResultMixinBytes(_NetlocResultMixinBase, _ResultMixinBytes):
+    __slots__ = ()
+
+    @property
+    def _userinfo(self):
+        netloc = self.netloc
+        userinfo, have_info, hostinfo = netloc.rpartition(b'@')
+        if have_info:
+            username, have_password, password = userinfo.partition(b':')
+            if not have_password:
+                password = None
+        else:
+            username = password = None
+        return username, password
+
+    @property
+    def _hostinfo(self):
+        netloc = self.netloc
+        _, _, hostinfo = netloc.rpartition(b'@')
+        _, have_open_br, bracketed = hostinfo.partition(b'[')
+        if have_open_br:
+            hostname, _, port = bracketed.partition(b']')
+            _, have_port, port = port.partition(b':')
+        else:
+            hostname, have_port, port = hostinfo.partition(b':')
+        if not have_port:
+            port = None
+        return hostname, port
+
+
+from collections import namedtuple
+
+_DefragResultBase = namedtuple('DefragResult', 'url fragment')
+_SplitResultBase = namedtuple('SplitResult', 'scheme netloc path query fragment')
+_ParseResultBase = namedtuple('ParseResult', 'scheme netloc path params query fragment')
+
+# For backwards compatibility, alias _NetlocResultMixinStr
+# ResultBase is no longer part of the documented API, but it is
+# retained since deprecating it isn't worth the hassle
+ResultBase = _NetlocResultMixinStr
+
+# Structured result objects for string data
+class DefragResult(_DefragResultBase, _ResultMixinStr):
+    __slots__ = ()
+    def geturl(self):
+        if self.fragment:
+            return self.url + '#' + self.fragment
+        else:
+            return self.url
+
+class SplitResult(_SplitResultBase, _NetlocResultMixinStr):
+    __slots__ = ()
+    def geturl(self):
+        return urlunsplit(self)
+
+class ParseResult(_ParseResultBase, _NetlocResultMixinStr):
+    __slots__ = ()
+    def geturl(self):
+        return urlunparse(self)
+
+# Structured result objects for bytes data
+class DefragResultBytes(_DefragResultBase, _ResultMixinBytes):
+    __slots__ = ()
+    def geturl(self):
+        if self.fragment:
+            return self.url + b'#' + self.fragment
+        else:
+            return self.url
+
+class SplitResultBytes(_SplitResultBase, _NetlocResultMixinBytes):
+    __slots__ = ()
+    def geturl(self):
+        return urlunsplit(self)
+
+class ParseResultBytes(_ParseResultBase, _NetlocResultMixinBytes):
+    __slots__ = ()
+    def geturl(self):
+        return urlunparse(self)
+
+# Set up the encode/decode result pairs
+def _fix_result_transcoding():
+    _result_pairs = (
+        (DefragResult, DefragResultBytes),
+        (SplitResult, SplitResultBytes),
+        (ParseResult, ParseResultBytes),
+    )
+    for _decoded, _encoded in _result_pairs:
+        _decoded._encoded_counterpart = _encoded
+        _encoded._decoded_counterpart = _decoded
+
+_fix_result_transcoding()
+del _fix_result_transcoding
+
+def urlparse(url, scheme='', allow_fragments=True):
+    """Parse a URL into 6 components:
+    <scheme>://<netloc>/<path>;<params>?<query>#<fragment>
+    Return a 6-tuple: (scheme, netloc, path, params, query, fragment).
+    Note that we don't break the components up in smaller bits
+    (e.g. netloc is a single string) and we don't expand % escapes."""
+    url, scheme, _coerce_result = _coerce_args(url, scheme)
+    splitresult = urlsplit(url, scheme, allow_fragments)
+    scheme, netloc, url, query, fragment = splitresult
+    if scheme in uses_params and ';' in url:
+        url, params = _splitparams(url)
+    else:
+        params = ''
+    result = ParseResult(scheme, netloc, url, params, query, fragment)
+    return _coerce_result(result)
+
+def _splitparams(url):
+    if '/'  in url:
+        i = url.find(';', url.rfind('/'))
+        if i < 0:
+            return url, ''
+    else:
+        i = url.find(';')
+    return url[:i], url[i+1:]
+
+def _splitnetloc(url, start=0):
+    delim = len(url)   # position of end of domain part of url, default is end
+    for c in '/?#':    # look for delimiters; the order is NOT important
+        wdelim = url.find(c, start)        # find first of this delim
+        if wdelim >= 0:                    # if found
+            delim = min(delim, wdelim)     # use earliest delim position
+    return url[start:delim], url[delim:]   # return (domain, rest)
+
+def urlsplit(url, scheme='', allow_fragments=True):
+    """Parse a URL into 5 components:
+    <scheme>://<netloc>/<path>?<query>#<fragment>
+    Return a 5-tuple: (scheme, netloc, path, query, fragment).
+    Note that we don't break the components up in smaller bits
+    (e.g. netloc is a single string) and we don't expand % escapes."""
+    url, scheme, _coerce_result = _coerce_args(url, scheme)
+    allow_fragments = bool(allow_fragments)
+    key = url, scheme, allow_fragments, type(url), type(scheme)
+    cached = _parse_cache.get(key, None)
+    if cached:
+        return _coerce_result(cached)
+    if len(_parse_cache) >= MAX_CACHE_SIZE: # avoid runaway growth
+        clear_cache()
+    netloc = query = fragment = ''
+    i = url.find(':')
+    if i > 0:
+        if url[:i] == 'http': # optimize the common case
+            scheme = url[:i].lower()
+            url = url[i+1:]
+            if url[:2] == '//':
+                netloc, url = _splitnetloc(url, 2)
+                if (('[' in netloc and ']' not in netloc) or
+                        (']' in netloc and '[' not in netloc)):
+                    raise ValueError("Invalid IPv6 URL")
+            if allow_fragments and '#' in url:
+                url, fragment = url.split('#', 1)
+            if '?' in url:
+                url, query = url.split('?', 1)
+            v = SplitResult(scheme, netloc, url, query, fragment)
+            _parse_cache[key] = v
+            return _coerce_result(v)
+        for c in url[:i]:
+            if c not in scheme_chars:
+                break
+        else:
+            # make sure "url" is not actually a port number (in which case
+            # "scheme" is really part of the path)
+            rest = url[i+1:]
+            if not rest or any(c not in '0123456789' for c in rest):
+                # not a port number
+                scheme, url = url[:i].lower(), rest
+
+    if url[:2] == '//':
+        netloc, url = _splitnetloc(url, 2)
+        if (('[' in netloc and ']' not in netloc) or
+                (']' in netloc and '[' not in netloc)):
+            raise ValueError("Invalid IPv6 URL")
+    if allow_fragments and '#' in url:
+        url, fragment = url.split('#', 1)
+    if '?' in url:
+        url, query = url.split('?', 1)
+    v = SplitResult(scheme, netloc, url, query, fragment)
+    _parse_cache[key] = v
+    return _coerce_result(v)
+
+def urlunparse(components):
+    """Put a parsed URL back together again.  This may result in a
+    slightly different, but equivalent URL, if the URL that was parsed
+    originally had redundant delimiters, e.g. a ? with an empty query
+    (the draft states that these are equivalent)."""
+    scheme, netloc, url, params, query, fragment, _coerce_result = (
+                                                  _coerce_args(*components))
+    if params:
+        url = "%s;%s" % (url, params)
+    return _coerce_result(urlunsplit((scheme, netloc, url, query, fragment)))
+
+def urlunsplit(components):
+    """Combine the elements of a tuple as returned by urlsplit() into a
+    complete URL as a string. The data argument can be any five-item iterable.
+    This may result in a slightly different, but equivalent URL, if the URL that
+    was parsed originally had unnecessary delimiters (for example, a ? with an
+    empty query; the RFC states that these are equivalent)."""
+    scheme, netloc, url, query, fragment, _coerce_result = (
+                                          _coerce_args(*components))
+    if netloc or (scheme and scheme in uses_netloc and url[:2] != '//'):
+        if url and url[:1] != '/': url = '/' + url
+        url = '//' + (netloc or '') + url
+    if scheme:
+        url = scheme + ':' + url
+    if query:
+        url = url + '?' + query
+    if fragment:
+        url = url + '#' + fragment
+    return _coerce_result(url)
+
+def urljoin(base, url, allow_fragments=True):
+    """Join a base URL and a possibly relative URL to form an absolute
+    interpretation of the latter."""
+    if not base:
+        return url
+    if not url:
+        return base
+    base, url, _coerce_result = _coerce_args(base, url)
+    bscheme, bnetloc, bpath, bparams, bquery, bfragment = \
+            urlparse(base, '', allow_fragments)
+    scheme, netloc, path, params, query, fragment = \
+            urlparse(url, bscheme, allow_fragments)
+    if scheme != bscheme or scheme not in uses_relative:
+        return _coerce_result(url)
+    if scheme in uses_netloc:
+        if netloc:
+            return _coerce_result(urlunparse((scheme, netloc, path,
+                                              params, query, fragment)))
+        netloc = bnetloc
+    if path[:1] == '/':
+        return _coerce_result(urlunparse((scheme, netloc, path,
+                                          params, query, fragment)))
+    if not path and not params:
+        path = bpath
+        params = bparams
+        if not query:
+            query = bquery
+        return _coerce_result(urlunparse((scheme, netloc, path,
+                                          params, query, fragment)))
+    segments = bpath.split('/')[:-1] + path.split('/')
+    # XXX The stuff below is bogus in various ways...
+    if segments[-1] == '.':
+        segments[-1] = ''
+    while '.' in segments:
+        segments.remove('.')
+    while 1:
+        i = 1
+        n = len(segments) - 1
+        while i < n:
+            if (segments[i] == '..'
+                and segments[i-1] not in ('', '..')):
+                del segments[i-1:i+1]
+                break
+            i = i+1
+        else:
+            break
+    if segments == ['', '..']:
+        segments[-1] = ''
+    elif len(segments) >= 2 and segments[-1] == '..':
+        segments[-2:] = ['']
+    return _coerce_result(urlunparse((scheme, netloc, '/'.join(segments),
+                                      params, query, fragment)))
+
+def urldefrag(url):
+    """Removes any existing fragment from URL.
+
+    Returns a tuple of the defragmented URL and the fragment.  If
+    the URL contained no fragments, the second element is the
+    empty string.
+    """
+    url, _coerce_result = _coerce_args(url)
+    if '#' in url:
+        s, n, p, a, q, frag = urlparse(url)
+        defrag = urlunparse((s, n, p, a, q, ''))
+    else:
+        frag = ''
+        defrag = url
+    return _coerce_result(DefragResult(defrag, frag))
+
+_hexdig = '0123456789ABCDEFabcdef'
+_hextobyte = dict(((a + b).encode(), bytes([int(a + b, 16)]))
+                  for a in _hexdig for b in _hexdig)
+
+def unquote_to_bytes(string):
+    """unquote_to_bytes('abc%20def') -> b'abc def'."""
+    # Note: strings are encoded as UTF-8. This is only an issue if it contains
+    # unescaped non-ASCII characters, which URIs should not.
+    if not string:
+        # Is it a string-like object?
+        string.split
+        return bytes(b'')
+    if isinstance(string, str):
+        string = string.encode('utf-8')
+    ### For Python-Future:
+    # It is already a byte-string object, but force it to be newbytes here on
+    # Py2:
+    string = bytes(string)
+    ###
+    bits = string.split(b'%')
+    if len(bits) == 1:
+        return string
+    res = [bits[0]]
+    append = res.append
+    for item in bits[1:]:
+        try:
+            append(_hextobyte[item[:2]])
+            append(item[2:])
+        except KeyError:
+            append(b'%')
+            append(item)
+    return bytes(b'').join(res)
+
+_asciire = re.compile('([\x00-\x7f]+)')
+
+def unquote(string, encoding='utf-8', errors='replace'):
+    """Replace %xx escapes by their single-character equivalent. The optional
+    encoding and errors parameters specify how to decode percent-encoded
+    sequences into Unicode characters, as accepted by the bytes.decode()
+    method.
+    By default, percent-encoded sequences are decoded with UTF-8, and invalid
+    sequences are replaced by a placeholder character.
+
+    unquote('abc%20def') -> 'abc def'.
+    """
+    if '%' not in string:
+        string.split
+        return string
+    if encoding is None:
+        encoding = 'utf-8'
+    if errors is None:
+        errors = 'replace'
+    bits = _asciire.split(string)
+    res = [bits[0]]
+    append = res.append
+    for i in range(1, len(bits), 2):
+        append(unquote_to_bytes(bits[i]).decode(encoding, errors))
+        append(bits[i + 1])
+    return ''.join(res)
+
+def parse_qs(qs, keep_blank_values=False, strict_parsing=False,
+             encoding='utf-8', errors='replace'):
+    """Parse a query given as a string argument.
+
+        Arguments:
+
+        qs: percent-encoded query string to be parsed
+
+        keep_blank_values: flag indicating whether blank values in
+            percent-encoded queries should be treated as blank strings.
+            A true value indicates that blanks should be retained as
+            blank strings.  The default false value indicates that
+            blank values are to be ignored and treated as if they were
+            not included.
+
+        strict_parsing: flag indicating what to do with parsing errors.
+            If false (the default), errors are silently ignored.
+            If true, errors raise a ValueError exception.
+
+        encoding and errors: specify how to decode percent-encoded sequences
+            into Unicode characters, as accepted by the bytes.decode() method.
+    """
+    parsed_result = {}
+    pairs = parse_qsl(qs, keep_blank_values, strict_parsing,
+                      encoding=encoding, errors=errors)
+    for name, value in pairs:
+        if name in parsed_result:
+            parsed_result[name].append(value)
+        else:
+            parsed_result[name] = [value]
+    return parsed_result
+
+def parse_qsl(qs, keep_blank_values=False, strict_parsing=False,
+              encoding='utf-8', errors='replace'):
+    """Parse a query given as a string argument.
+
+    Arguments:
+
+    qs: percent-encoded query string to be parsed
+
+    keep_blank_values: flag indicating whether blank values in
+        percent-encoded queries should be treated as blank strings.  A
+        true value indicates that blanks should be retained as blank
+        strings.  The default false value indicates that blank values
+        are to be ignored and treated as if they were  not included.
+
+    strict_parsing: flag indicating what to do with parsing errors. If
+        false (the default), errors are silently ignored. If true,
+        errors raise a ValueError exception.
+
+    encoding and errors: specify how to decode percent-encoded sequences
+        into Unicode characters, as accepted by the bytes.decode() method.
+
+    Returns a list, as G-d intended.
+    """
+    qs, _coerce_result = _coerce_args(qs)
+    pairs = [s2 for s1 in qs.split('&') for s2 in s1.split(';')]
+    r = []
+    for name_value in pairs:
+        if not name_value and not strict_parsing:
+            continue
+        nv = name_value.split('=', 1)
+        if len(nv) != 2:
+            if strict_parsing:
+                raise ValueError("bad query field: %r" % (name_value,))
+            # Handle case of a control-name with no equal sign
+            if keep_blank_values:
+                nv.append('')
+            else:
+                continue
+        if len(nv[1]) or keep_blank_values:
+            name = nv[0].replace('+', ' ')
+            name = unquote(name, encoding=encoding, errors=errors)
+            name = _coerce_result(name)
+            value = nv[1].replace('+', ' ')
+            value = unquote(value, encoding=encoding, errors=errors)
+            value = _coerce_result(value)
+            r.append((name, value))
+    return r
+
+def unquote_plus(string, encoding='utf-8', errors='replace'):
+    """Like unquote(), but also replace plus signs by spaces, as required for
+    unquoting HTML form values.
+
+    unquote_plus('%7e/abc+def') -> '~/abc def'
+    """
+    string = string.replace('+', ' ')
+    return unquote(string, encoding, errors)
+
+_ALWAYS_SAFE = frozenset(bytes(b'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+                               b'abcdefghijklmnopqrstuvwxyz'
+                               b'0123456789'
+                               b'_.-'))
+_ALWAYS_SAFE_BYTES = bytes(_ALWAYS_SAFE)
+_safe_quoters = {}
+
+class Quoter(collections.defaultdict):
+    """A mapping from bytes (in range(0,256)) to strings.
+
+    String values are percent-encoded byte values, unless the key < 128, and
+    in the "safe" set (either the specified safe set, or default set).
+    """
+    # Keeps a cache internally, using defaultdict, for efficiency (lookups
+    # of cached keys don't call Python code at all).
+    def __init__(self, safe):
+        """safe: bytes object."""
+        self.safe = _ALWAYS_SAFE.union(bytes(safe))
+
+    def __repr__(self):
+        # Without this, will just display as a defaultdict
+        return "<Quoter %r>" % dict(self)
+
+    def __missing__(self, b):
+        # Handle a cache miss. Store quoted string in cache and return.
+        res = chr(b) if b in self.safe else '%{0:02X}'.format(b)
+        self[b] = res
+        return res
+
+def quote(string, safe='/', encoding=None, errors=None):
+    """quote('abc def') -> 'abc%20def'
+
+    Each part of a URL, e.g. the path info, the query, etc., has a
+    different set of reserved characters that must be quoted.
+
+    RFC 2396 Uniform Resource Identifiers (URI): Generic Syntax lists
+    the following reserved characters.
+
+    reserved    = ";" | "/" | "?" | ":" | "@" | "&" | "=" | "+" |
+                  "$" | ","
+
+    Each of these characters is reserved in some component of a URL,
+    but not necessarily in all of them.
+
+    By default, the quote function is intended for quoting the path
+    section of a URL.  Thus, it will not encode '/'.  This character
+    is reserved, but in typical usage the quote function is being
+    called on a path where the existing slash characters are used as
+    reserved characters.
+
+    string and safe may be either str or bytes objects. encoding must
+    not be specified if string is a str.
+
+    The optional encoding and errors parameters specify how to deal with
+    non-ASCII characters, as accepted by the str.encode method.
+    By default, encoding='utf-8' (characters are encoded with UTF-8), and
+    errors='strict' (unsupported characters raise a UnicodeEncodeError).
+    """
+    if isinstance(string, str):
+        if not string:
+            return string
+        if encoding is None:
+            encoding = 'utf-8'
+        if errors is None:
+            errors = 'strict'
+        string = string.encode(encoding, errors)
+    else:
+        if encoding is not None:
+            raise TypeError("quote() doesn't support 'encoding' for bytes")
+        if errors is not None:
+            raise TypeError("quote() doesn't support 'errors' for bytes")
+    return quote_from_bytes(string, safe)
+
+def quote_plus(string, safe='', encoding=None, errors=None):
+    """Like quote(), but also replace ' ' with '+', as required for quoting
+    HTML form values. Plus signs in the original string are escaped unless
+    they are included in safe. It also does not have safe default to '/'.
+    """
+    # Check if ' ' in string, where string may either be a str or bytes.  If
+    # there are no spaces, the regular quote will produce the right answer.
+    if ((isinstance(string, str) and ' ' not in string) or
+        (isinstance(string, bytes) and b' ' not in string)):
+        return quote(string, safe, encoding, errors)
+    if isinstance(safe, str):
+        space = str(' ')
+    else:
+        space = bytes(b' ')
+    string = quote(string, safe + space, encoding, errors)
+    return string.replace(' ', '+')
+
+def quote_from_bytes(bs, safe='/'):
+    """Like quote(), but accepts a bytes object rather than a str, and does
+    not perform string-to-bytes encoding.  It always returns an ASCII string.
+    quote_from_bytes(b'abc def\x3f') -> 'abc%20def%3f'
+    """
+    if not isinstance(bs, (bytes, bytearray)):
+        raise TypeError("quote_from_bytes() expected bytes")
+    if not bs:
+        return str('')
+    ### For Python-Future:
+    bs = bytes(bs)
+    ###
+    if isinstance(safe, str):
+        # Normalize 'safe' by converting to bytes and removing non-ASCII chars
+        safe = str(safe).encode('ascii', 'ignore')
+    else:
+        ### For Python-Future:
+        safe = bytes(safe)
+        ###
+        safe = bytes([c for c in safe if c < 128])
+    if not bs.rstrip(_ALWAYS_SAFE_BYTES + safe):
+        return bs.decode()
+    try:
+        quoter = _safe_quoters[safe]
+    except KeyError:
+        _safe_quoters[safe] = quoter = Quoter(safe).__getitem__
+    return str('').join([quoter(char) for char in bs])
+
+def urlencode(query, doseq=False, safe='', encoding=None, errors=None):
+    """Encode a sequence of two-element tuples or dictionary into a URL query string.
+
+    If any values in the query arg are sequences and doseq is true, each
+    sequence element is converted to a separate parameter.
+
+    If the query arg is a sequence of two-element tuples, the order of the
+    parameters in the output will match the order of parameters in the
+    input.
+
+    The query arg may be either a string or a bytes type. When query arg is a
+    string, the safe, encoding and error parameters are sent the quote_plus for
+    encoding.
+    """
+
+    if hasattr(query, "items"):
+        query = query.items()
+    else:
+        # It's a bother at times that strings and string-like objects are
+        # sequences.
+        try:
+            # non-sequence items should not work with len()
+            # non-empty strings will fail this
+            if len(query) and not isinstance(query[0], tuple):
+                raise TypeError
+            # Zero-length sequences of all types will get here and succeed,
+            # but that's a minor nit.  Since the original implementation
+            # allowed empty dicts that type of behavior probably should be
+            # preserved for consistency
+        except TypeError:
+            ty, va, tb = sys.exc_info()
+            raise_with_traceback(TypeError("not a valid non-string sequence "
+                                           "or mapping object"), tb)
+
+    l = []
+    if not doseq:
+        for k, v in query:
+            if isinstance(k, bytes):
+                k = quote_plus(k, safe)
+            else:
+                k = quote_plus(str(k), safe, encoding, errors)
+
+            if isinstance(v, bytes):
+                v = quote_plus(v, safe)
+            else:
+                v = quote_plus(str(v), safe, encoding, errors)
+            l.append(k + '=' + v)
+    else:
+        for k, v in query:
+            if isinstance(k, bytes):
+                k = quote_plus(k, safe)
+            else:
+                k = quote_plus(str(k), safe, encoding, errors)
+
+            if isinstance(v, bytes):
+                v = quote_plus(v, safe)
+                l.append(k + '=' + v)
+            elif isinstance(v, str):
+                v = quote_plus(v, safe, encoding, errors)
+                l.append(k + '=' + v)
+            else:
+                try:
+                    # Is this a sufficient test for sequence-ness?
+                    x = len(v)
+                except TypeError:
+                    # not a sequence
+                    v = quote_plus(str(v), safe, encoding, errors)
+                    l.append(k + '=' + v)
+                else:
+                    # loop over the sequence
+                    for elt in v:
+                        if isinstance(elt, bytes):
+                            elt = quote_plus(elt, safe)
+                        else:
+                            elt = quote_plus(str(elt), safe, encoding, errors)
+                        l.append(k + '=' + elt)
+    return str('&').join(l)
+
+# Utilities to parse URLs (most of these return None for missing parts):
+# unwrap('<URL:type://host/path>') --> 'type://host/path'
+# splittype('type:opaquestring') --> 'type', 'opaquestring'
+# splithost('//host[:port]/path') --> 'host[:port]', '/path'
+# splituser('user[:passwd]@host[:port]') --> 'user[:passwd]', 'host[:port]'
+# splitpasswd('user:passwd') -> 'user', 'passwd'
+# splitport('host:port') --> 'host', 'port'
+# splitquery('/path?query') --> '/path', 'query'
+# splittag('/path#tag') --> '/path', 'tag'
+# splitattr('/path;attr1=value1;attr2=value2;...') ->
+#   '/path', ['attr1=value1', 'attr2=value2', ...]
+# splitvalue('attr=value') --> 'attr', 'value'
+# urllib.parse.unquote('abc%20def') -> 'abc def'
+# quote('abc def') -> 'abc%20def')
+
+def to_bytes(url):
+    """to_bytes(u"URL") --> 'URL'."""
+    # Most URL schemes require ASCII. If that changes, the conversion
+    # can be relaxed.
+    # XXX get rid of to_bytes()
+    if isinstance(url, str):
+        try:
+            url = url.encode("ASCII").decode()
+        except UnicodeError:
+            raise UnicodeError("URL " + repr(url) +
+                               " contains non-ASCII characters")
+    return url
+
+def unwrap(url):
+    """unwrap('<URL:type://host/path>') --> 'type://host/path'."""
+    url = str(url).strip()
+    if url[:1] == '<' and url[-1:] == '>':
+        url = url[1:-1].strip()
+    if url[:4] == 'URL:': url = url[4:].strip()
+    return url
+
+_typeprog = None
+def splittype(url):
+    """splittype('type:opaquestring') --> 'type', 'opaquestring'."""
+    global _typeprog
+    if _typeprog is None:
+        import re
+        _typeprog = re.compile('^([^/:]+):')
+
+    match = _typeprog.match(url)
+    if match:
+        scheme = match.group(1)
+        return scheme.lower(), url[len(scheme) + 1:]
+    return None, url
+
+_hostprog = None
+def splithost(url):
+    """splithost('//host[:port]/path') --> 'host[:port]', '/path'."""
+    global _hostprog
+    if _hostprog is None:
+        import re
+        _hostprog = re.compile('^//([^/?]*)(.*)$')
+
+    match = _hostprog.match(url)
+    if match:
+        host_port = match.group(1)
+        path = match.group(2)
+        if path and not path.startswith('/'):
+            path = '/' + path
+        return host_port, path
+    return None, url
+
+_userprog = None
+def splituser(host):
+    """splituser('user[:passwd]@host[:port]') --> 'user[:passwd]', 'host[:port]'."""
+    global _userprog
+    if _userprog is None:
+        import re
+        _userprog = re.compile('^(.*)@(.*)$')
+
+    match = _userprog.match(host)
+    if match: return match.group(1, 2)
+    return None, host
+
+_passwdprog = None
+def splitpasswd(user):
+    """splitpasswd('user:passwd') -> 'user', 'passwd'."""
+    global _passwdprog
+    if _passwdprog is None:
+        import re
+        _passwdprog = re.compile('^([^:]*):(.*)$',re.S)
+
+    match = _passwdprog.match(user)
+    if match: return match.group(1, 2)
+    return user, None
+
+# splittag('/path#tag') --> '/path', 'tag'
+_portprog = None
+def splitport(host):
+    """splitport('host:port') --> 'host', 'port'."""
+    global _portprog
+    if _portprog is None:
+        import re
+        _portprog = re.compile('^(.*):([0-9]+)$')
+
+    match = _portprog.match(host)
+    if match: return match.group(1, 2)
+    return host, None
+
+_nportprog = None
+def splitnport(host, defport=-1):
+    """Split host and port, returning numeric port.
+    Return given default port if no ':' found; defaults to -1.
+    Return numerical port if a valid number are found after ':'.
+    Return None if ':' but not a valid number."""
+    global _nportprog
+    if _nportprog is None:
+        import re
+        _nportprog = re.compile('^(.*):(.*)$')
+
+    match = _nportprog.match(host)
+    if match:
+        host, port = match.group(1, 2)
+        try:
+            if not port: raise ValueError("no digits")
+            nport = int(port)
+        except ValueError:
+            nport = None
+        return host, nport
+    return host, defport
+
+_queryprog = None
+def splitquery(url):
+    """splitquery('/path?query') --> '/path', 'query'."""
+    global _queryprog
+    if _queryprog is None:
+        import re
+        _queryprog = re.compile('^(.*)\?([^?]*)$')
+
+    match = _queryprog.match(url)
+    if match: return match.group(1, 2)
+    return url, None
+
+_tagprog = None
+def splittag(url):
+    """splittag('/path#tag') --> '/path', 'tag'."""
+    global _tagprog
+    if _tagprog is None:
+        import re
+        _tagprog = re.compile('^(.*)#([^#]*)$')
+
+    match = _tagprog.match(url)
+    if match: return match.group(1, 2)
+    return url, None
+
+def splitattr(url):
+    """splitattr('/path;attr1=value1;attr2=value2;...') ->
+        '/path', ['attr1=value1', 'attr2=value2', ...]."""
+    words = url.split(';')
+    return words[0], words[1:]
+
+_valueprog = None
+def splitvalue(attr):
+    """splitvalue('attr=value') --> 'attr', 'value'."""
+    global _valueprog
+    if _valueprog is None:
+        import re
+        _valueprog = re.compile('^([^=]*)=(.*)$')
+
+    match = _valueprog.match(attr)
+    if match: return match.group(1, 2)
+    return attr, None