matrixeqtl: MatrixEQTL/man/Matrix_eQTL

comparison MatrixEQTL/man/Matrix_eQTL_main.Rd @ 0:cd4c8e4a4b5b draft

Uploaded

author	jasonxu
date	Fri, 12 Mar 2021 08:12:46 +0000
parents
children

comparison

equal deleted inserted replaced

--1:000000000000
+:cd4c8e4a4b5b
+\name{Matrix_eQTL_main}
+\alias{Matrix_eQTL_main}
+\alias{Matrix_eQTL_engine}
+\title{
+	Main function for fast eQTL analysis in MatrixEQTL package
+}
+\description{
+	\code{Matrix_eQTL_engine} function tests association of every row of the \code{snps} dataset with every row of the \code{gene} dataset using a linear regression model defined by the \code{useModel} parameter (see below).
+	The testing procedure accounts for extra covariates in \code{cvrt} parameter.
+	The \code{errorCovariance} parameter can be set to the error variance-covariance matrix to account for heteroskedastic and/or correlated errors.
+	Associations significant at \code{pvOutputThreshold} (\code{pvOutputThreshold.cis}) levels are saved to \code{output_file_name} (\code{output_file_name.cis}), with corresponding estimates of effect size (slope coefficient), test statistics, p-values, and q-values (false discovery rate).
+	Matrix eQTL can perform separate analysis for local (cis) and distant (trans) eQTLs.
+	For such analysis one has to set the cis-analysis specific parameters \code{pvOutputThreshold.cis > 0}, \code{cisDist}, \code{snpspos} and {genepos} in the call of \code{Matrix_eQTL_main} function.
+	A gene-SNP pair is considered local if the distance between them is less or equal to \code{cisDist}.
+	The genomic location of genes and SNPs is defined by data frames \code{snpspos} and {genepos}.
+	Depending on p-value thresholds \code{pvOutputThreshold} and \code{pvOutputThreshold.cis} Matrix eQTL runs in one of three different modes:
+	\itemize{
+		\item Set \code{pvOutputThreshold > 0} and \code{pvOutputThreshold.cis = 0} (or use \code{Matrix_eQTL_engine}) to perform eQTL analysis without using gene/SNP locations. Associations significant at the \code{pvOutputThreshold} level are be recorded in \code{output_file_name} and in the returned object.
+		\item Set \code{pvOutputThreshold = 0} and \code{pvOutputThreshold.cis > 0} to perform eQTL analysis for local gene-SNP pairs only. Local associations significant at \code{pvOutputThreshold.cis} level will be recorded in \code{output_file_name.cis} and in the returned object.
+		\item Set \code{pvOutputThreshold > 0} and \code{pvOutputThreshold.cis > 0} to perform eQTL analysis with separate p-value thresholds for local and distant eQTLs. Distant and local associations significant at corresponding thresholds are recorded in \code{output_file_name} and \code{output_file_name.cis} respectively and in the returned object. In this case the false discovery rate is calculated separately for these two sets of eQTLs.
+	}
+	\code{Matrix_eQTL_engine} is a wrapper for \code{Matrix_eQTL_main} for eQTL analysis without regard to gene/SNP location and provided for compatibility with the previous versions of the package.
+	The parameter \code{pvalue.hist} allows to record information sufficient to create a histogram or QQ-plot of all the p-values (see \code{\link[=plot.MatrixEQTL]{plot}}).
+}
+\usage{
+Matrix_eQTL_main( snps,
+gene,
+cvrt = SlicedData$new(),
+output_file_name = "",
+pvOutputThreshold = 1e-5,
+useModel = modelLINEAR,
+errorCovariance = numeric(),
+verbose = TRUE,
+output_file_name.cis = "",
+pvOutputThreshold.cis = 0,
+snpspos = NULL,
+genepos = NULL,
+cisDist = 1e6,
+pvalue.hist = FALSE,
+min.pv.by.genesnp = FALSE,
+noFDRsaveMemory = FALSE)
+Matrix_eQTL_engine(snps,
+gene,
+cvrt = SlicedData$new(),
+output_file_name,
+pvOutputThreshold = 1e-5,
+useModel = modelLINEAR,
+errorCovariance = numeric(),
+verbose = TRUE,
+pvalue.hist = FALSE,
+min.pv.by.genesnp = FALSE,
+noFDRsaveMemory = FALSE)
+}
+\arguments{
+	\item{snps}{
+		\code{\linkS4class{SlicedData}} object with genotype information.
+		Can be real-valued for linear models and must take at most 3 distinct values for ANOVA unless the number of ANOVA categories is set to a higher number (see \code{useModel} parameter).
+	}
+	\item{gene}{
+		\code{\linkS4class{SlicedData}} object with gene expression information.
+		Must have columns matching those of \code{snps}.
+	}
+	\item{cvrt}{
+		\code{\linkS4class{SlicedData}} object with additional covariates.
+		Can be an empty \code{SlicedData} object in case of no covariates.
+		The constant is always included in the model and would cause an error if included in \code{cvrt}.
+		The order of columns must match those in \code{snps} and \code{gene}.
+	}
+	\item{output_file_name}{
+		\code{character}, \code{connection}, or \code{NULL}.
+		If not \code{NULL}, significant associations are saved to this file (all significant associations if \code{pvOutputThreshold=0} or only distant if \code{pvOutputThreshold>0}).
+		If the file with this name exists, it is overwritten.
+	}
+	\item{output_file_name.cis}{
+		\code{character}, \code{connection}, or \code{NULL}.
+		If not \code{NULL}, significant local associations are saved to this file.
+		If the file with this name exists, it is overwritten.
+	}
+	\item{pvOutputThreshold}{
+		\code{numeric}. Significance threshold for all/distant tests.
+	}
+	\item{pvOutputThreshold.cis}{
+		\code{numeric}. Same as \code{pvOutputThreshold}, but for local eQTLs.
+	}
+	\item{useModel}{
+		\code{integer}. Eigher \code{modelLINEAR}, \code{modelANOVA}, or \code{modelLINEAR_CROSS}.
+		\enumerate{
+			\item Set \code{useModel = \link{modelLINEAR}} to model the effect of the genotype as additive linear and test for its significance using t-statistic.
+			\item Set \code{useModel = \link{modelANOVA}} to treat genotype as a categorical variables and use ANOVA model and test for its significance using F-test. The default number of ANOVA categories is 3. Set otherwise like this: \code{options(MatrixEQTL.ANOVA.categories=4)}.
+			\item Set \code{useModel = \link{modelLINEAR_CROSS}} to add a new term to the model
+			equal to the product of genotype and the last covariate; the significance of this term is then tested using t-statistic.
+		}
+	}
+	\item{errorCovariance}{
+		\code{numeric}. The error covariance matrix. Use \code{numeric()} for homoskedastic independent errors.
+	}
+	\item{verbose}{
+		\code{logical}. Set to \code{TRUE} to display more detailed report about the progress.
+	}
+	\item{snpspos}{
+		\code{data.frame} object with information about SNP locations, must have 3 columns - SNP name, chromosome, and position, like this:
+		\tabular{ccc}{
+			snpid   \tab chr   		\tab pos 	   \cr
+			Snp_01  \tab 1     \tab 721289  \cr
+			Snp_02  \tab 1     \tab 752565  \cr
+			\ldots  \tab \ldots   \tab \ldots  \cr
+		}
+	}
+	\item{genepos}{
+		\code{data.frame} with information about transcript locations, must have 4 columns - the name, chromosome, and positions of the left and right ends, like this:
+		\tabular{cccc}{
+			geneid  \tab chr   		\tab left 	\tab right \cr
+			Gene_01 \tab 1     \tab 721289 \tab 731289 \cr
+			Gene_02 \tab   1     \tab 752565 \tab 762565 \cr
+			\ldots  \tab \ldots   \tab \ldots \tab \ldots \cr
+		}
+	}
+	\item{cisDist}{
+		\code{numeric}. SNP-gene pairs within this distance are considered local. The distance is measured from the nearest end of the gene. SNPs within a gene are always considered local.
+	}
+	\item{pvalue.hist}{
+		\code{logical}, \code{numerical}, or \code{"qqplot"}.
+		Defines whether and how the distribution of p-values is recorded in the returned object.
+		If \code{pvalue.hist = FALSE}, the information is not recorded and the analysis is performed faster.
+		Alternatively, set \code{pvalue.hist = "qqplot"} to record information sufficient to create a QQ-plot of the p-values (use \code{\link[=plot.MatrixEQTL]{plot}} on the returned object to create the plot).
+		To record information for a histogram set \code{pvalue.hist} to the desired number of bins of equal size.	Finally, \code{pvalue.hist} can also be set to a custom set of bin edges.
+	}
+	\item{min.pv.by.genesnp}{
+		\code{logical}. Set \code{min.pv.by.genesnp = TRUE} to record the minimum p-value for each SNP and each gene in the returned object. The minimum p-values are recorded even if if they are above the corresponding thresholds of \code{pvOutputThreshold} and \code{pvOutputThreshold.cis}. The analysis runs faster when the parameter is set to \code{FALSE}.
+	}
+	\item{noFDRsaveMemory}{
+		\code{logical}. Set \code{noFDRsaveMemory = TRUE} to save significant gene-SNP pairs directly to the output files, reduce memory footprint and skip FDR calculation. The eQTLs are not recorded in the returned object if \code{noFDRsaveMemory = TRUE}.
+	}
+}
+\details{
+	Note that the columns of \code{gene}, \code{snps}, and \code{cvrt} must match.
+	If they do not match in the input files, use \code{ColumnSubsample} method to subset and/or reorder them.
+}
+\value{
+	The detected eQTLs are saved in \code{output_file_name} and/or \code{output_file_name.cis} if they are not \code{NULL}.
+	The method also returns a list with a summary of the performed analysis.
+	\item{param}{Keeps all input parameters and also records the number of degrees of freedom for the full model.}
+	\item{time.in.sec}{Time difference between the start and the end of the analysis (in seconds).}
+	\item{all}{Information about all detected eQTLs.}
+	\item{cis}{Information about detected local eQTLs.}
+	\item{trans}{Information about detected distant eQTLs.}
+	The elements \code{all}, \code{cis}, and \code{trans} may contain the following components
+	\describe{
+		\item{\code{ntests}}{Total number of tests performed. This is used for FDR calculation.}
+		\item{\code{eqtls}}{Data frame with recorded significant associations. Not available if \code{noFDRsaveMemory=FALSE}}
+		\item{\code{neqtls}}{Number of significant associations recorded.}
+		\item{\code{hist.bins}}{Histogram bins used for recording p-value distribution. See \code{pvalue.hist} parameter.}
+		\item{\code{hist.counts}}{Number of p-value that fell in each histogram bin. See \code{pvalue.hist} parameter.}
+		\item{\code{min.pv.snps}}{Vector with the best p-value for each SNP. See \code{min.pv.by.genesnp} parameter.}
+		\item{\code{min.pv.gene}}{Vector with the best p-value for each gene. See \code{min.pv.by.genesnp} parameter.}
+	}
+}
+\references{
+	The package website: \url{http://www.bios.unc.edu/research/genomic_software/Matrix_eQTL/}
+}
+\author{
+	Andrey Shabalin \email{ashabalin@vcu.edu}
+}
+\seealso{
+	The code below is the sample code for eQTL analysis NOT using gene/SNP locations.
+	See \code{\link{MatrixEQTL_cis_code}} for sample code for eQTL analysis that separates local and distant tests.
+}
+\examples{
+# Matrix eQTL by Andrey A. Shabalin
+# http://www.bios.unc.edu/research/genomic_software/Matrix_eQTL/
+#
+# Be sure to use an up to date version of R and Matrix eQTL.
+# source("Matrix_eQTL_R/Matrix_eQTL_engine.r");
+library(MatrixEQTL)
+## Location of the package with the data files.
+base.dir = find.package('MatrixEQTL');
+## Settings
+# Linear model to use, modelANOVA, modelLINEAR, or modelLINEAR_CROSS
+useModel = modelLINEAR; # modelANOVA, modelLINEAR, or modelLINEAR_CROSS
+# Genotype file name
+SNP_file_name = paste(base.dir, "/data/SNP.txt", sep="");
+# Gene expression file name
+expression_file_name = paste(base.dir, "/data/GE.txt", sep="");
+# Covariates file name
+# Set to character() for no covariates
+covariates_file_name = paste(base.dir, "/data/Covariates.txt", sep="");
+# Output file name
+output_file_name = tempfile();
+# Only associations significant at this level will be saved
+pvOutputThreshold = 1e-2;
+# Error covariance matrix
+# Set to numeric() for identity.
+errorCovariance = numeric();
+# errorCovariance = read.table("Sample_Data/errorCovariance.txt");
+## Load genotype data
+snps = SlicedData$new();
+snps$fileDelimiter = "\t";      # the TAB character
+snps$fileOmitCharacters = "NA"; # denote missing values;
+snps$fileSkipRows = 1;          # one row of column labels
+snps$fileSkipColumns = 1;       # one column of row labels
+snps$fileSliceSize = 2000;      # read file in slices of 2,000 rows
+snps$LoadFile(SNP_file_name);
+## Load gene expression data
+gene = SlicedData$new();
+gene$fileDelimiter = "\t";      # the TAB character
+gene$fileOmitCharacters = "NA"; # denote missing values;
+gene$fileSkipRows = 1;          # one row of column labels
+gene$fileSkipColumns = 1;       # one column of row labels
+gene$fileSliceSize = 2000;      # read file in slices of 2,000 rows
+gene$LoadFile(expression_file_name);
+## Load covariates
+cvrt = SlicedData$new();
+cvrt$fileDelimiter = "\t";      # the TAB character
+cvrt$fileOmitCharacters = "NA"; # denote missing values;
+cvrt$fileSkipRows = 1;          # one row of column labels
+cvrt$fileSkipColumns = 1;       # one column of row labels
+if(length(covariates_file_name)>0) {
+cvrt$LoadFile(covariates_file_name);
+}
+## Run the analysis
+me = Matrix_eQTL_engine(
+snps = snps,
+gene = gene,
+cvrt = cvrt,
+output_file_name = output_file_name,
+pvOutputThreshold = pvOutputThreshold,
+useModel = useModel,
+errorCovariance = errorCovariance,
+verbose = TRUE,
+pvalue.hist = TRUE,
+min.pv.by.genesnp = FALSE,
+noFDRsaveMemory = FALSE);
+unlink(output_file_name);
+## Results:
+cat('Analysis done in: ', me$time.in.sec, ' seconds', '\n');
+cat('Detected eQTLs:', '\n');
+show(me$all$eqtls)
+## Plot the histogram of all p-values
+plot(me)
+}

Mercurial > repos > jasonxu > matrixeqtl

comparison MatrixEQTL/man/Matrix_eQTL_main.Rd @ 0:cd4c8e4a4b5b draft