#!/usr/bin/env python

"""
Runs Bowtie on single-end or paired-end data.
For use with Bowtie v. 0.12.7

usage: bowtie_wrapper.py [options]
    -t, --threads=t: The number of threads to run
    -o, --output=o: The output file
    --output_unmapped_reads=: File name for unmapped reads (single-end)
    --output_unmapped_reads_l=: File name for unmapped reads (left, paired-end)
    --output_unmapped_reads_r=: File name for unmapped reads (right, paired-end)
    --output_suppressed_reads=: File name for suppressed reads because of max setting (single-end)
    --output_suppressed_reads_l=: File name for suppressed reads because of max setting (left, paired-end)
    --output_suppressed_reads_r=: File name for suppressed reads because of max setting (right, paired-end)
    -i, --input1=i: The (forward or single-end) reads file in Sanger FASTQ format
    -I, --input2=I: The reverse reads file in Sanger FASTQ format
    -4, --dataType=4: The type of data (SOLiD or Solexa)
    -2, --paired=2: Whether the data is single- or paired-end
    -g, --genomeSource=g: The type of reference provided
    -r, --ref=r: The reference genome to use or index
    -s, --skip=s: Skip the first n reads
    -a, --alignLimit=a: Only align the first n reads
    -T, --trimH=T: Trim n bases from high-quality (left) end of each read before alignment
    -L, --trimL=L: Trim n bases from low-quality (right) end of each read before alignment
    -m, --mismatchSeed=m: Maximum number of mismatches permitted in the seed
    -M, --mismatchQual=M: Maximum permitted total of quality values at mismatched read positions
    -l, --seedLen=l: Seed length
    -n, --rounding=n: Whether or not to round to the nearest 10 and saturating at 30
    -P, --maxMismatches=P: Maximum number of mismatches for -v alignment mode
    -w, --tryHard=: Whether or not to try as hard as possible to find valid alignments when they exist
    -V, --allValAligns=V: Whether or not to report all valid alignments per read or pair
    -v, --valAlign=v: Report up to n valid alignments per read or pair
    -G, --suppressAlign=G: Suppress all alignments for a read if more than n reportable alignments exist
    -b, --best=b: Whether or not to make Bowtie guarantee that reported singleton alignments are 'best' in terms of stratum and in terms of the quality values at the mismatched positions
    -B, --maxBacktracks=B: Maximum number of backtracks permitted when aligning a read
    -R, --strata=R: Whether or not to report only those alignments that fall in the best stratum if many valid alignments exist and are reportable
    -j, --minInsert=j: Minimum insert size for valid paired-end alignments
    -J, --maxInsert=J: Maximum insert size for valid paired-end alignments
    -O, --mateOrient=O: The upstream/downstream mate orientation for valid paired-end alignment against the forward reference strand
    -A, --maxAlignAttempt=A: Maximum number of attempts Bowtie will make to match an alignment for one mate with an alignment for the opposite mate
    -f, --forwardAlign=f: Whether or not to attempt to align the forward reference strand
    -E, --reverseAlign=E: Whether or not to attempt to align the reverse-complement reference strand
    -F, --offrate=F: Override the offrate of the index to n
    -8, --snpphred=8: SNP penalty on Phred scale
    -6, --snpfrac=6: Fraction of sites expected to be SNP sites
    -7, --keepends=7: Keep extreme-end nucleotides and qualities
    -S, --seed=S: Seed for pseudo-random number generator
    -C, --params=C: Whether to use default or specified parameters
    -u, --iautoB=u: Automatic or specified behavior
    -K, --ipacked=K: Whether or not to use a packed representation for DNA strings
    -Q, --ibmax=Q: Maximum number of suffixes allowed in a block
    -Y, --ibmaxdivn=Y: Maximum number of suffixes allowed in a block as a fraction of the length of the reference
    -D, --idcv=D: The period for the difference-cover sample
    -U, --inodc=U: Whether or not to disable the use of the difference-cover sample
    -y, --inoref=y: Whether or not to build the part of the reference index used only in paired-end alignment
    -z, --ioffrate=z: How many rows get marked during annotation of some or all of the Burrows-Wheeler rows
    -W, --iftab=W: The size of the lookup table used to calculate an initial Burrows-Wheeler range with respect to the first n characters of the query
    -X, --intoa=X: Whether or not to convert Ns in the reference sequence to As
    -N, --iendian=N: Endianness to use when serializing integers to the index file
    -Z, --iseed=Z: Seed for the pseudorandom number generator
    -x, --indexSettings=x: Whether or not indexing options are to be set
    -H, --suppressHeader=H: Suppress header
    --do_not_build_index: Flag to specify that provided file is already indexed and to just use 'as is'
"""

import optparse, os, shutil, subprocess, sys, tempfile

#Allow more than Sanger encoded variants
DEFAULT_ASCII_ENCODING = '--phred33-quals'
GALAXY_FORMAT_TO_QUALITY_SCORE_ENCODING_ARG = { 'fastqsanger':'--phred33-quals', 'fastqillumina':'--phred64-quals', 'fastqsolexa':'--solexa-quals' }
#FIXME: Integer quality scores are supported only when the '--integer-quals' argument is specified to bowtie; this is not currently able to be set in the tool/wrapper/config

def stop_err( msg ):
    sys.stderr.write( '%s\n' % msg )
    sys.exit()

def __main__():
    #Parse Command Line
    parser = optparse.OptionParser()
    parser.add_option( '-t', '--threads', dest='threads', help='The number of threads to run' )
    parser.add_option( '-o', '--output', dest='output', help='The output file' )
    parser.add_option( '', '--output_unmapped_reads', dest='output_unmapped_reads', help='File name for unmapped reads (single-end)' )
    parser.add_option( '', '--output_unmapped_reads_l', dest='output_unmapped_reads_l', help='File name for unmapped reads (left, paired-end)' )
    parser.add_option( '', '--output_unmapped_reads_r', dest='output_unmapped_reads_r', help='File name for unmapped reads (right, paired-end)' )
    parser.add_option( '', '--output_suppressed_reads', dest='output_suppressed_reads', help='File name for suppressed reads because of max setting (single-end)' )
    parser.add_option( '', '--output_suppressed_reads_l', dest='output_suppressed_reads_l', help='File name for suppressed reads because of max setting (left, paired-end)' )
    parser.add_option( '', '--output_suppressed_reads_r', dest='output_suppressed_reads_r', help='File name for suppressed reads because of max setting (right, paired-end)' )
    parser.add_option( '-4', '--dataType', dest='dataType', help='The type of data (SOLiD or Solexa)' )
    parser.add_option( '-i', '--input1', dest='input1', help='The (forward or single-end) reads file in Sanger FASTQ or FASTA format' )
    
    
    
    parser.add_option( '--filetype', dest='filetype', help='The filetype of your input reads - FASTA (f) or FASTQ (q)' )
    parser.add_option( '--outtype', dest='outtype', help='The filetype of your output (nothing for map or -S for SAM)' )
    
    
    parser.add_option( '-I', '--input2', dest='input2', help='The reverse reads file in Sanger FASTQ format' )
    parser.add_option( '-2', '--paired', dest='paired', help='Whether the data is single- or paired-end' )
    parser.add_option( '-g', '--genomeSource', dest='genomeSource', help='The type of reference provided' )
    parser.add_option( '-r', '--ref', dest='ref', help='The reference genome to use or index' )
    parser.add_option( '-s', '--skip', dest='skip', help='Skip the first n reads' )
    parser.add_option( '-a', '--alignLimit', dest='alignLimit', help='Only align the first n reads' )
    parser.add_option( '-T', '--trimH', dest='trimH', help='Trim n bases from high-quality (left) end of each read before alignment' )
    parser.add_option( '-L', '--trimL', dest='trimL', help='Trim n bases from low-quality (right) end of each read before alignment' )
    parser.add_option( '-m', '--mismatchSeed', dest='mismatchSeed', help='Maximum number of mismatches permitted in the seed' )
    parser.add_option( '-M', '--mismatchQual', dest='mismatchQual', help='Maximum permitted total of quality values at mismatched read positions' )
    parser.add_option( '-l', '--seedLen', dest='seedLen', help='Seed length' )
    parser.add_option( '-n', '--rounding', dest='rounding', help='Whether or not to round to the nearest 10 and saturating at 30' )
    parser.add_option( '-P', '--maxMismatches', dest='maxMismatches', help='Maximum number of mismatches for -v alignment mode' )
    parser.add_option( '-w', '--tryHard', dest='tryHard', help='Whether or not to try as hard as possible to find valid alignments when they exist' )
    parser.add_option( '-V', '--allValAligns', dest='allValAligns', help='Whether or not to report all valid alignments per read or pair' )
    parser.add_option( '-v', '--valAlign', dest='valAlign', help='Report up to n valid alignments per read or pair' )
    parser.add_option( '-G', '--suppressAlign', dest='suppressAlign', help='Suppress all alignments for a read if more than n reportable alignments exist' )
    parser.add_option( '-b', '--best', dest='best', help="Whether or not to make Bowtie guarantee that reported singleton alignments are 'best' in terms of stratum and in terms of the quality values at the mismatched positions" )
    parser.add_option( '-B', '--maxBacktracks', dest='maxBacktracks', help='Maximum number of backtracks permitted when aligning a read' )
    parser.add_option( '-R', '--strata', dest='strata', help='Whether or not to report only those alignments that fall in the best stratum if many valid alignments exist and are reportable' )
    parser.add_option( '-j', '--minInsert', dest='minInsert', help='Minimum insert size for valid paired-end alignments' )
    parser.add_option( '-J', '--maxInsert', dest='maxInsert', help='Maximum insert size for valid paired-end alignments' )
    parser.add_option( '-O', '--mateOrient', dest='mateOrient', help='The upstream/downstream mate orientation for valid paired-end alignment against the forward reference strand' )
    parser.add_option( '-A', '--maxAlignAttempt', dest='maxAlignAttempt', help='Maximum number of attempts Bowtie will make to match an alignment for one mate with an alignment for the opposite mate' )
    parser.add_option( '-f', '--forwardAlign', dest='forwardAlign', help='Whether or not to attempt to align the forward reference strand' )
    parser.add_option( '-E', '--reverseAlign', dest='reverseAlign', help='Whether or not to attempt to align the reverse-complement reference strand' )
    parser.add_option( '-F', '--offrate', dest='offrate', help='Override the offrate of the index to n' )
    parser.add_option( '-S', '--seed', dest='seed', help='Seed for pseudo-random number generator' )
    parser.add_option( '-8', '--snpphred', dest='snpphred', help='SNP penalty on Phred scale' )
    parser.add_option( '-6', '--snpfrac', dest='snpfrac', help='Fraction of sites expected to be SNP sites' )
    parser.add_option( '-7', '--keepends', dest='keepends', help='Keep extreme-end nucleotides and qualities' )
    parser.add_option( '-C', '--params', dest='params', help='Whether to use default or specified parameters' )
    parser.add_option( '-u', '--iautoB', dest='iautoB', help='Automatic or specified behavior' )
    parser.add_option( '-K', '--ipacked', dest='ipacked', help='Whether or not to use a packed representation for DNA strings' )
    parser.add_option( '-Q', '--ibmax', dest='ibmax', help='Maximum number of suffixes allowed in a block' )
    parser.add_option( '-Y', '--ibmaxdivn', dest='ibmaxdivn', help='Maximum number of suffixes allowed in a block as a fraction of the length of the reference' )
    parser.add_option( '-D', '--idcv', dest='idcv', help='The period for the difference-cover sample' )
    parser.add_option( '-U', '--inodc', dest='inodc', help='Whether or not to disable the use of the difference-cover sample' )
    parser.add_option( '-y', '--inoref', dest='inoref', help='Whether or not to build the part of the reference index used only in paired-end alignment' )
    parser.add_option( '-z', '--ioffrate', dest='ioffrate', help='How many rows get marked during annotation of some or all of the Burrows-Wheeler rows' )
    parser.add_option( '-W', '--iftab', dest='iftab', help='The size of the lookup table used to calculate an initial Burrows-Wheeler range with respect to the first n characters of the query' )
    parser.add_option( '-X', '--intoa', dest='intoa', help='Whether or not to convert Ns in the reference sequence to As' )
    parser.add_option( '-N', '--iendian', dest='iendian', help='Endianness to use when serializing integers to the index file' )
    parser.add_option( '-Z', '--iseed', dest='iseed', help='Seed for the pseudorandom number generator' )
    parser.add_option( '-x', '--indexSettings', dest='index_settings', help='Whether or not indexing options are to be set' )
    parser.add_option( '-H', '--suppressHeader', dest='suppressHeader', help='Suppress header' )
    parser.add_option( '--galaxy_input_format', dest='galaxy_input_format', default="fastqsanger", help='galaxy input format' )
    parser.add_option( '--do_not_build_index', dest='do_not_build_index', action="store_true", default=False, help='Flag to specify that provided file is already indexed, use as is' )
    (options, args) = parser.parse_args()
    if options.mismatchSeed and options.maxMismatches:
        parser.error("options --mismatchSeed and --maxMismatches are mutually exclusive")
    stdout = ''

    # make temp directory for placement of indices and copy reference file there if necessary
    tmp_index_dir = tempfile.mkdtemp()
    # get type of data (solid or solexa)
    if options.dataType == 'solid':
        colorspace = '-C'
    else:
        colorspace = ''
    # index if necessary
    if options.genomeSource == 'history' and not options.do_not_build_index:
        # set up commands
        if options.index_settings =='indexPreSet':
            indexing_cmds = '%s' % colorspace
        else:
            try:
                if options.iautoB and options.iautoB == 'set':
                    iautoB = '--noauto'
                else:
                    iautoB = ''
                if options.ipacked and options.ipacked == 'packed':
                    ipacked = '--packed'
                else:
                    ipacked = ''
                if options.ibmax and int( options.ibmax ) >= 1:
                    ibmax = '--bmax %s' % options.ibmax
                else:
                    ibmax = ''
                if options.ibmaxdivn and int( options.ibmaxdivn ) >= 0:
                    ibmaxdivn = '--bmaxdivn %s' % options.ibmaxdivn
                else:
                    ibmaxdivn = ''
                if options.idcv and int( options.idcv ) >= 3:
                    idcv = '--dcv %s' % options.idcv
                else:
                    idcv = ''
                if options.inodc and options.inodc == 'nodc':
                    inodc = '--nodc'
                else:
                    inodc = ''
                if options.inoref and options.inoref == 'noref':
                    inoref = '--noref'
                else:
                    inoref = ''
                if options.iftab and int( options.iftab ) >= 1:
                    iftab = '--ftabchars %s' % options.iftab
                else:
                    iftab = ''
                if options.intoa and options.intoa == 'yes':
                    intoa = '--ntoa'
                else:
                    intoa = ''
                if options.iendian and options.iendian == 'big':
                    iendian = '--big'
                else:
                    iendian = '--little'
                if options.iseed and int( options.iseed ) > 0:
                    iseed = '--seed %s' % options.iseed
                else:
                    iseed = ''
                indexing_cmds = '%s %s %s %s %s %s %s --offrate %s %s %s %s %s %s' % \
                                ( iautoB, ipacked, ibmax, ibmaxdivn, idcv, inodc,
                                  inoref, options.ioffrate, iftab, intoa, iendian,
                                  iseed, colorspace )
            except ValueError, e:
                # clean up temp dir
                if os.path.exists( tmp_index_dir ):
                    shutil.rmtree( tmp_index_dir )
                stop_err( "Something is wrong with the indexing parameters and the indexing and alignment could not be run. Make sure you don't have any non-numeric values where they should be numeric.\n" + str( e ) )
        ref_file = tempfile.NamedTemporaryFile( dir=tmp_index_dir )
        ref_file_name = ref_file.name
        ref_file.close()
        os.symlink( options.ref, ref_file_name )
        cmd1 = 'bowtie-build %s -f %s %s' % ( indexing_cmds, ref_file_name, ref_file_name )
        try:
            tmp = tempfile.NamedTemporaryFile( dir=tmp_index_dir ).name
            tmp_stderr = open( tmp, 'wb' )
            proc = subprocess.Popen( args=cmd1, shell=True, cwd=tmp_index_dir, stderr=tmp_stderr.fileno() )
            returncode = proc.wait()
            tmp_stderr.close()
            # get stderr, allowing for case where it's very large
            tmp_stderr = open( tmp, 'rb' )
            stderr = ''
            buffsize = 1048576
            try:
                while True:
                    stderr += tmp_stderr.read( buffsize )
                    if not stderr or len( stderr ) % buffsize != 0:
                        break
            except OverflowError:
                pass
            tmp_stderr.close()
            if returncode != 0:
                raise Exception, stderr
        except Exception, e:
            # clean up temp dir
            if os.path.exists( tmp_index_dir ):
                shutil.rmtree( tmp_index_dir )
            stop_err( 'Error indexing reference sequence\n' + str( e ) )
        stdout += 'File indexed. '
    else:
        ref_file_name = options.ref
    # set up aligning and generate aligning command options
    # automatically set threads in both cases
    tmp_suppressed_file_name = None
    tmp_unmapped_file_name = None
    if options.suppressHeader == 'true':
        suppressHeader = '--sam-nohead'
    else:
        suppressHeader = ''
    if options.maxInsert and int( options.maxInsert ) > 0:
        maxInsert = '-X %s' % options.maxInsert
    else:
        maxInsert = ''
    if options.mateOrient:
        mateOrient = '--%s' % options.mateOrient
    else:
        mateOrient = ''
    quality_score_encoding = GALAXY_FORMAT_TO_QUALITY_SCORE_ENCODING_ARG.get( options.galaxy_input_format, DEFAULT_ASCII_ENCODING )
    if options.params == 'preSet':
        aligning_cmds = '-f %s %s -p %s -S %s %s %s ' % \
                ( maxInsert, mateOrient, options.threads, suppressHeader, colorspace, quality_score_encoding )
           
    else:
        try:
            if options.skip and int( options.skip ) > 0:
                skip = '-s %s' % options.skip
            else:
                skip = ''
            if options.alignLimit and int( options.alignLimit ) >= 0:
                alignLimit = '-u %s' % options.alignLimit
            else:
                alignLimit = ''
            if options.trimH and int( options.trimH ) > 0:
                trimH = '-5 %s' % options.trimH
            else:
                trimH = ''
            if options.trimL and int( options.trimL ) > 0:
                trimL = '-3 %s' % options.trimL
            else:
                trimL = ''
            if options.maxMismatches and (options.maxMismatches == '0' or options.maxMismatches == '1' \
                        or options.maxMismatches == '2' or options.maxMismatches == '3'):
                maxMismatches = '-v %s' % options.maxMismatches
            else:
                maxMismatches = ''
            if options.mismatchSeed and (options.mismatchSeed == '0' or options.mismatchSeed == '1' \
                        or options.mismatchSeed == '2' or options.mismatchSeed == '3'):
                mismatchSeed = '-n %s' % options.mismatchSeed
            else:
                mismatchSeed = ''
            if options.mismatchQual and int( options.mismatchQual ) >= 1:
                mismatchQual = '-e %s' % options.mismatchQual
            else:
                mismatchQual = ''
            if options.seedLen and int( options.seedLen ) >= 5:
                seedLen = '-l %s' % options.seedLen
            else:
                seedLen = ''
            if options.rounding == 'noRound':
                rounding = '--nomaqround'
            else:
                rounding = ''
            if options.minInsert and int( options.minInsert ) > 0:
                minInsert = '-I %s' % options.minInsert
            else:
                minInsert = ''
            if options.maxAlignAttempt and int( options.maxAlignAttempt ) >= 0:
                maxAlignAttempt = '--pairtries %s' % options.maxAlignAttempt
            else:
                maxAlignAttempt = ''
            if options.forwardAlign == 'noForward':
                forwardAlign = '--nofw'
            else:
                forwardAlign = ''
            if options.reverseAlign == 'noReverse':
                reverseAlign = '--norc'
            else:
                reverseAlign = ''
            if options.maxBacktracks and int( options.maxBacktracks ) > 0 and \
                    ( options.mismatchSeed == '2' or options.mismatchSeed == '3' ):
                maxBacktracks = '--maxbts %s' % options.maxBacktracks
            else:
                maxBacktracks = ''
            if options.tryHard == 'doTryHard':
                tryHard = '-y'
            else:
                tryHard = ''
            if options.valAlign and int( options.valAlign ) >= 0:
                valAlign = '-k %s' % options.valAlign
            else:
                valAlign = ''
            if options.allValAligns == 'doAllValAligns':
                allValAligns = '-a'
            else:
                allValAligns = ''
            if options.suppressAlign and int( options.suppressAlign ) >= 0:
                suppressAlign = '-m %s' % options.suppressAlign
            else:
                suppressAlign = ''
            if options.best == 'doBest':
                best = '--best'
            else:
                best = ''
            if options.strata == 'doStrata':
                strata = '--strata'
            else:
                strata = ''
            if options.offrate and int( options.offrate ) >= 0:
                offrate = '-o %s' % options.offrate
            else:
                offrate = ''
            if options.seed and int( options.seed ) >= 0:
                seed = '--seed %s' % options.seed
            else:
                seed = ''
            if options.paired == 'paired':
                if options.output_unmapped_reads_l and options.output_unmapped_reads_r:
                    tmp_unmapped_file = tempfile.NamedTemporaryFile( dir=tmp_index_dir, suffix='.fastq' )
                    tmp_unmapped_file_name = tmp_unmapped_file.name
                    tmp_unmapped_file.close()
                    output_unmapped_reads = '--un %s' % tmp_unmapped_file_name
                else:
                    output_unmapped_reads = ''
                if options.output_suppressed_reads:
                    tmp_suppressed_file = tempfile.NamedTemporaryFile( dir=tmp_index_dir, suffix='.fastq' )
                    tmp_suppressed_file_name = tmp_suppressed_file.name
                    tmp_suppressed_file.close()
                    output_suppressed_reads = '--max %s' % tmp_suppressed_file_name
                else:
                    output_suppressed_reads = ''
            else:
                if options.output_unmapped_reads:
                    output_unmapped_reads = '--un %s' % options.output_unmapped_reads
                else:
                    output_unmapped_reads = ''
                if options.output_suppressed_reads:
                    output_suppressed_reads = '--max %s' % options.output_suppressed_reads
                else:
                    output_suppressed_reads = ''
            snpfrac = ''
            if options.snpphred and int( options.snpphred ) >= 0:
                snpphred = '--snpphred %s' % options.snpphred
            else:
                snpphred = ''
                if options.snpfrac and float( options.snpfrac ) >= 0:
                    snpfrac = '--snpfrac %s' % options.snpfrac
            if options.keepends and options.keepends == 'doKeepends':
                keepends = '--col-keepends'
            else:
                keepends = ''
                
                
        	
        	
        	
        	if options.filetype == 'f':
        		filetype = '-f'
    		else:
    			filetype = '-q'
    			
    		if options.outtype == 'S':
        		outtype = '-S'
    		else:
    			outtype = ''
         
           
            aligning_cmds = '%s %s %s -p %s %s %s %s %s %s %s %s %s %s %s %s %s %s ' \
                            '%s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s ' % \
                            ( filetype, maxInsert, mateOrient, options.threads, outtype, suppressHeader,
                              colorspace, skip, alignLimit, trimH, trimL, maxMismatches,
                              mismatchSeed, mismatchQual, seedLen, rounding, minInsert,
                              maxAlignAttempt, forwardAlign, reverseAlign, maxBacktracks,
                              tryHard, valAlign, allValAligns, suppressAlign, best,
                              strata, offrate, seed, snpphred, snpfrac, keepends,
                              output_unmapped_reads, output_suppressed_reads,
                              quality_score_encoding )
                              
                              
                          
                              
     
                              
        except ValueError, e:
            # clean up temp dir
            if os.path.exists( tmp_index_dir ):
                shutil.rmtree( tmp_index_dir )
            stop_err( 'Something is wrong with the alignment parameters and the alignment could not be run\n' + str( e ) )
    try:
        # have to nest try-except in try-finally to handle 2.4
        try:
            # prepare actual mapping commands
            if options.paired == 'paired':
                cmd2 = 'bowtie %s %s -1 %s -2 %s > %s' % ( aligning_cmds, ref_file_name, options.input1, options.input2, options.output )
            else:
                cmd2 = 'bowtie %s %s %s > %s' % ( aligning_cmds, ref_file_name, options.input1, options.output )
            # align
            tmp = tempfile.NamedTemporaryFile( dir=tmp_index_dir ).name
            tmp_stderr = open( tmp, 'wb' )
            proc = subprocess.Popen( args=cmd2, shell=True, cwd=tmp_index_dir, stderr=tmp_stderr.fileno() )
            returncode = proc.wait()
            tmp_stderr.close()
            # get stderr, allowing for case where it's very large
            tmp_stderr = open( tmp, 'rb' )
            stderr = ''
            buffsize = 1048576
            try:
                while True:
                    stderr += tmp_stderr.read( buffsize )
                    if not stderr or len( stderr ) % buffsize != 0:
                        break
            except OverflowError:
                pass
            tmp_stderr.close()
            if returncode != 0:
                raise Exception, stderr
            # get suppressed and unmapped reads output files in place if appropriate
            if options.paired == 'paired' and tmp_suppressed_file_name and \
                               options.output_suppressed_reads_l and options.output_suppressed_reads_r:
                try:
                    left = tmp_suppressed_file_name.replace( '.fastq', '_1.fastq' )
                    right = tmp_suppressed_file_name.replace( '.fastq', '_1.fastq' )
                    shutil.move( left, options.output_suppressed_reads_l )
                    shutil.move( right, options.output_suppressed_reads_r )
                except Exception, e:
                    sys.stdout.write( 'Error producing the suppressed output file.\n' )
            if options.paired == 'paired' and tmp_unmapped_file_name and \
                               options.output_unmapped_reads_l and options.output_unmapped_reads_r:
                try:
                    left = tmp_unmapped_file_name.replace( '.fastq', '_1.fastq' )
                    right = tmp_unmapped_file_name.replace( '.fastq', '_2.fastq' )
                    shutil.move( left, options.output_unmapped_reads_l )
                    shutil.move( right, options.output_unmapped_reads_r )
                except Exception, e:
                    sys.stdout.write( 'Error producing the unmapped output file.\n' )
            # check that there are results in the output file
            if os.path.getsize( options.output ) == 0:
                raise Exception, 'The output file is empty, there may be an error with your input file or settings.'
        except Exception, e:
            stop_err( 'Error aligning sequence. ' + str( e ) )
    finally:
        # clean up temp dir
        if os.path.exists( tmp_index_dir ):
            shutil.rmtree( tmp_index_dir )
    stdout += 'Sequence file aligned.\n'
    sys.stdout.write( stdout )

if __name__ == "__main__":
    __main__()