--- a/heatmap.sh	Thu Nov 08 14:59:04 2018 -0500
+++ b/heatmap.sh	Thu Jun 20 11:30:12 2019 -0400
@@ -1,16 +1,133 @@
-#echo $1 $2 $3 $4 $5 $6 $7 $8 $9 ${10} ${11} ${12} ${13} ${14} ${15} ${16} ${17} ${18}
+#echo "1: " $1" 2: " $2" 3: " $3" 4: "$4" 5: "$5 " 6: "$6 "7: "$7" 8: "$8 " 9: "$9" 10: "${10}" 11: "${11} "12: "${12} 
+#echo " 13: "${13}" 14: "${14}" 15: "${15}" 16: "${16} "17: "${17}" 18: "${18}" 19: "${19}" 20: "${20}" 21: "${21} " 22: "${22}" 23:" ${23} 
 
-#get tool data and tool install directories
-tooldir=$(cut -d';' -f1 <<< ${12})
-tooldata=$(cut -d';' -f2 <<< ${12})
+#Count total number of parameters and classification parameters
+parmSize=0
+classSize=0
+matrixSize=0
+for i in "$@"; do
+	currParm=$(cut -d'|' -f1 <<< $i)
+	parmSize=$((parmSize+1))
+	if [ $currParm = "classification" ]
+	then
+		classSize=$((classSize+1))
+  	fi
+done
 
+#Get tool data and tool install directories
+tooldir=$1
+tooldata=$2
 #create temp directory for row and col order and dendro files.
 tdir=$tooldata/$(date +%y%m%d%M%S)
-echo $tdir
 mkdir $tdir
+#echo "tdir: "$tdir
+
+#Extract parameters for row and column order and dendro files
+rowOrderFile=$tdir/ROfile.txt
+rowDendroFile=$tdir/RDfile.txt
+colOrderFile=$tdir/COfile.txt
+colDendroFile=$tdir/CDfile.txt
+rowOrderJson='"order_file": "'$rowOrderFile'",'
+rowDendroJson='"dendro_file": "'$rowDendroFile'",'
+colOrderJson='"order_file": "'$colOrderFile'",'
+colDendroJson='"dendro_file": "'$colDendroFile'",'
+
+#BEGIN: Construct JSON for all non-repeating parameters
+parmJson='{'
+rowConfigJson='"row_configuration": {'
+colConfigJson='"col_configuration": {'
+
+ctr=0
+for i in "$@"; do
+	if [ $ctr -gt 1 ]
+	then
+		currParm=$(cut -d'|' -f1 <<< $i)
+		if [ $currParm != "matrix_files" ] && [ $currParm != "row_configuration" ] && [ $currParm != "col_configuration" ] && [ $currParm != "classification" ]
+		then
+			#Parse pipe-delimited parameter parameter
+			parmJson=$parmJson' "'$(cut -d'|' -f1 <<< $i)'":"'$(cut -d'|' -f2 <<< $i)'",'
+	  	fi
+		if [ $currParm = "row_configuration" ]
+		then
+			rowOrder=$(cut -d'|' -f3 <<< $i)
+			rowDistance=$(cut -d'|' -f5 <<< $i)
+			rowAgglomeration=$(cut -d'|' -f7 <<< $i)
+			rowCuts=$(cut -d'|' -f9 <<< $i)
+			rowLabels=$(cut -d'|' -f11 <<< $i)
+			dataTypeJson='"'$(cut -d'|' -f10 <<< $i)'":["'$rowLabels'"]'
+			if [ $rowOrder = 'Hierarchical' ]
+			then
+				rowConfigJson=$rowConfigJson$rowOrderJson$rowDendroJson
+			fi
+			rowConfigJson=$rowConfigJson'"'$(cut -d'|' -f2 <<< $i)'":"'$(cut -d'|' -f3 <<< $i)'","'$(cut -d'|' -f4 <<< $i)'":"'$(cut -d'|' -f5 <<< $i)'","'$(cut -d'|' -f6 <<< $i)'":"'$(cut -d'|' -f7 <<< $i)'",'$dataTypeJson'},'
+	  	fi
+		if [ $currParm = "col_configuration" ]
+		then
+			colOrder=$(cut -d'|' -f3 <<< $i)
+			colDistance=$(cut -d'|' -f5 <<< $i)
+			colAgglomeration=$(cut -d'|' -f7 <<< $i)
+			colCuts=$(cut -d'|' -f9 <<< $i)
+			colLabels=$(cut -d'|' -f11 <<< $i)
+			dataTypeJson='"'$(cut -d'|' -f10 <<< $i)'":["'$colLabels'"]'
+			if [ $colOrder = 'Hierarchical' ]
+			then
+				colConfigJson=$colConfigJson$colOrderJson$colDendroJson
+			fi
+			colConfigJson=$colConfigJson'"'$(cut -d'|' -f2 <<< $i)'":"'$(cut -d'|' -f3 <<< $i)'","'$(cut -d'|' -f4 <<< $i)'":"'$(cut -d'|' -f5 <<< $i)'","'$(cut -d'|' -f6 <<< $i)'":"'$(cut -d'|' -f7 <<< $i)'",'$dataTypeJson'},'
+	  	fi
+	 fi
+	 ctr=$((ctr+1))
+done
+#END: Construct JSON for all non-repeating parameters
+#echo "rowCuts: "$rowCuts
+#echo "colCuts: "$colCuts
+#echo "ROW CONFIG JSON: "$rowConfigJson
+#echo "COL CONFIG JSON: "$colConfigJson
+
+#BEGIN: Construct JSON for data layers
+matrixJson='"matrix_files": [ '
+inputMatrix=''
+for i in "$@"; do
+	currParm=$(cut -d'|' -f1 <<< $i)
+	if [ $currParm = "matrix_files" ]
+	then
+		#Parse pipe-delimited parameter parameter
+		matrixJson=$matrixJson' {"'$(cut -d'|' -f2 <<< $i)'":"'$(cut -d'|' -f3 <<< $i)'","'$(cut -d'|' -f4 <<< $i)'":"'$(cut -d'|' -f5 <<< $i)'","'$(cut -d'|' -f6 <<< $i)'":"'$(cut -d'|' -f7 <<< $i)'"}'
+		inputMatrix=$(cut -d'|' -f3 <<< $i)
+  	fi
+done
+matrixJson=$matrixJson"],"
+#END: Construct JSON for data layers
+
+#BEGIN: Construct JSON for classification files
+classJson='"classification_files": [ '
+classIter=0
+for i in "$@"; do
+	currParm=$(cut -d'|' -f1 <<< $i)
+	if [ $currParm = "classification" ]
+	then
+		classIter=$((classIter+1))
+		#Parse pipe-delimited 3-part classification bar parameter
+		classJson=$classJson' {"'$(cut -d'|' -f2 <<< $i)'":"'$(cut -d'|' -f3 <<< $i)'","'$(cut -d'|' -f4 <<< $i)'":"'$(cut -d'|' -f5 <<< $i)'"'
+		classCat=$(cut -d'|' -f7 <<< $i)
+		classColorType=$(cut -d'_' -f2 <<< $classCat)
+		classJson=$classJson','
+		classJson=$classJson' "position":"'$(cut -d'_' -f1 <<< $classCat)'","color_map": {"type":"'$classColorType'"}}'
+		if [ $classIter -lt $classSize ]		
+		then
+			classJson=$classJson','
+		fi
+  	fi
+done
+classJson=$classJson']'
+#END: Construct JSON for classification files
+
+parmJson=$parmJson$matrixJson$rowConfigJson$colConfigJson$classJson
+parmJson=$parmJson'}'
+#echo "HEATMAP PARAMETERS JSON: "$parmJson	
 
 #run R to cluster matrix
-output="$(R --slave --vanilla --file=$tooldir/CHM.R --args $4 $5 $6 $7 $8 $9 ${10} $tdir/ROfile.txt $tdir/COfile.txt $tdir/RDfile.txt $tdir/CDfile.txt ${13} ${14} ${15} ${16} 2>&1)"
+output="$(R --slave --vanilla --file=$tooldir/CHM.R --args $inputMatrix $rowOrder $rowDistance $rowAgglomeration $colOrder $colDistance $colAgglomeration $rowOrderFile $colOrderFile $rowDendroFile $colDendroFile $rowCuts $colCuts $rowLabels $colLabels 2>&1)"
 rc=$?;
 if [ $rc != 0 ]
 then
@@ -24,33 +141,7 @@
   exit $rc;
 fi
 
-#there are a variable number of triplicate parameters for classification bars
-count=0
-classifications=''
-
-#if row cut was done, add that autogenerated classification
-if [ ${13} -gt 1 ]
-then
-  classifications="Class $tdir/ROfile.txt.cut row_categorical"
-fi
-
-#if col cut was done, add that autogenerated classification
-if [ ${14} -gt 1 ]
-then
-  classifications="$classifications Class $tdir/COfile.txt.cut col_categorical"
-fi
-
-#now add the user provided classification files 
-for i in "$@"; do
-  if [ $count -gt 16 ]
-  then
-    classifications=$classifications' '$i
-  fi
-  count=$((count+1))
-done
-echo "classifications " $classifications
-echo "${11} " ${11}
 #call java program to generate NGCHM viewer files.
-java -jar $tooldir/GalaxyMapGen.jar "${1}" "${2}" "${3}" DataLayer1 $4 linear ${15} ${16} $5 $6 $7 $tdir/ROfile.txt $tdir/RDfile.txt $8 $9 ${10} $tdir/COfile.txt $tdir/CDfile.txt ${11} $classifications
+java -jar $tooldir/GalaxyMapGen.jar "$parmJson"
 #clean up tempdir
 rm -rf $tdir