# HG changeset patch # User pjbriggs # Date 1458557563 14400 # Node ID cb56cc1d5c394d897b9b7161e228d482d9988797 # Parent e1a14ed7a9d6c6360ab3a430c858e1e210acacc9 Updates to the palfilter.py utility. diff -r e1a14ed7a9d6 -r cb56cc1d5c39 pal_filter.py --- a/pal_filter.py Wed Feb 24 08:25:17 2016 -0500 +++ b/pal_filter.py Mon Mar 21 06:52:43 2016 -0400 @@ -1,87 +1,140 @@ #!/usr/bin/python -tt -# -# pal_filter -# https://github.com/graemefox/pal_filter -# -################################################################################ -# Graeme Fox - 15/02/2016 - graeme.fox@manchester.ac.uk -# Tested on 64-bit Ubuntu, with Python 2.7 -# -################################################################################ -# PROGRAM DESCRIPTION -# -# Program to pick optimum loci from the output of pal_finder_v0.02.04 -# -# This program can be used to filter output from pal_finder and choose the -# 'optimum' loci. -# -# For the paper referncing this workflow, see Griffiths et al. -# (unpublished as of 15/02/2016) (sarah.griffiths-5@postgrad.manchester.ac.uk) -# -################################################################################ -# -# This program also contains a quality-check method to improve the rate of PCR -# success. For this QC method, paired end reads are assembled using -# PANDAseq so you must have PANDAseq installed. -# -# For the paper referencing this assembly-QC method see Fox et al. -# (unpublished as of 15/02/2016) (graeme.fox@manchester.ac.uk) -# -# For best results in PCR for marker development, I suggest enabling all the -# filter options AND the assembly based QC -# -################################################################################ -# REQUIREMENTS -# -# Must have Biopython installed (www.biopython.org). -# -# If you with to perform the assembly QC step, you must have: -# PandaSeq (https://github.com/neufeld/pandaseq) -# PandaSeq must be in your $PATH / able to run from anywhere -################################################################################ -# REQUIRED OPTIONS -# -# -i forward_paired_ends.fastQ -# -j reverse_paired_ends.fastQ -# -p pal_finder output - the "(microsatellites with read IDs and -# primer pairs)" file -# -# By default the program does nothing.... -# -# NON-REQUIRED OPTIONS -# -# -assembly: turn on the pandaseq assembly QC step -# -primers: filter microsatellite loci to just those which -# have primers designed -# -# -occurrences: filter microsatellite loci to those with primers -# which appear only once in the dataset -# -# -rankmotifs: filter microsatellite loci to just those with perfect motifs. -# Rank the output by size of motif (largest first) -# -########################################################### -# For repeat analysis, the following extra non-required options may be useful: -# -# Since PandaSeq Assembly, and fastq -> fasta conversion are slow, do them the -# first time, generate the files and then skip either, or both steps with -# the following: -# -# -a: skip assembly step -# -c: skip fastq -> fasta conversion step -# -# Just make sure to keep the assembled/converted files in the correct directory -# with the correct filename(s) -########################################################### -# -# EXAMPLE USAGE: -# -# pal_filtery.py -i R1.fastq -j R2.fastq -# -p pal_finder_output.tabular -primers -occurrences -rankmotifs -assembly -# -########################################################### +""" +pal_filter +https://github.com/graemefox/pal_filter + +Graeme Fox - 03/03/2016 - graeme.fox@manchester.ac.uk +Tested on 64-bit Ubuntu, with Python 2.7 + +~~~~~~~~~~~~~~~~~~~ +PROGRAM DESCRIPTION + +Program to pick optimum loci from the output of pal_finder_v0.02.04 + +This program can be used to filter output from pal_finder and choose the +'optimum' loci. + +For the paper referncing this workflow, see Griffiths et al. +(unpublished as of 15/02/2016) (sarah.griffiths-5@postgrad.manchester.ac.uk) + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +This program also contains a quality-check method to improve the rate of PCR +success. For this QC method, paired end reads are assembled using +PANDAseq so you must have PANDAseq installed. + +For the paper referencing this assembly-QC method see Fox et al. +(unpublished as of 15/02/2016) (graeme.fox@manchester.ac.uk) + +For best results in PCR for marker development, I suggest enabling all the +filter options AND the assembly based QC + +~~~~~~~~~~~~ +REQUIREMENTS + +Must have Biopython installed (www.biopython.org). + +If you with to perform the assembly QC step, you must have: +PandaSeq (https://github.com/neufeld/pandaseq) +PandaSeq must be in your $PATH / able to run from anywhere + +~~~~~~~~~~~~~~~~ +REQUIRED OPTIONS + +-i forward_paired_ends.fastQ +-j reverse_paired_ends.fastQ +-p pal_finder output - by default pal_finder names this "x_PAL_summary.txt" + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +BY DEFAULT THIS PROGRAM DOES NOTHING. ENABLE SOME OF THE OPTIONS BELOW. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +NON-REQUIRED OPTIONS + +-assembly: turn on the pandaseq assembly QC step + +-primers: filter microsatellite loci to just those which have primers designed + +-occurrences: filter microsatellite loci to those with primers + which appear only once in the dataset + +-rankmotifs: filter microsatellite loci to just those with perfect motifs. + Rank the output by size of motif (largest first) + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +For repeat analysis, the following extra non-required options may be useful: + +Since PandaSeq Assembly, and fastq -> fasta conversion are slow, do them the +first time, generate the files and then skip either, or both steps with +the following: + +-a: skip assembly step +-c: skip fastq -> fasta conversion step + +Just make sure to keep the assembled/converted files in the correct directory +with the correct filename(s) + +~~~~~~~~~~~~~~~ +EXAMPLE USAGE: + +pal_filtery.py -i R1.fastq -j R2.fastq + -p pal_finder_output.tabular -primers -occurrences -rankmotifs -assembly + +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +""" import Bio, subprocess, argparse, csv, os, re, time from Bio import SeqIO +__version__ = "1.0.0" +############################################################ +# Function List # +############################################################ +def ReverseComplement1(seq): + """ + take a nucleotide sequence and reverse-complement it + """ + seq_dict = {'A':'T','T':'A','G':'C','C':'G'} + return "".join([seq_dict[base] for base in reversed(seq)]) + +def fastq_to_fasta(input_file, wanted_set): + """ + take a file in fastq format, convert to fasta format and filter on + the set of sequences that we want to keep + """ + file_name = os.path.splitext(os.path.basename(input_file))[0] + with open(file_name + "_filtered.fasta", "w") as out: + for record in SeqIO.parse(input_file, "fastq"): + ID = str(record.id) + SEQ = str(record.seq) + if ID in wanted_set: + out.write(">" + ID + "\n" + SEQ + "\n") + +def strip_barcodes(input_file, wanted_set): + """ + take fastq data containing sequencing barcodes and strip the barcode + from each sequence. Filter on the set of sequences that we want to keep + """ + file_name = os.path.splitext(os.path.basename(input_file))[0] + with open(file_name + "_adapters_removed.fasta", "w") as out: + for record in SeqIO.parse(input_file, "fasta"): + match = re.search(r'\S*:', record.id) + if match: + correct = match.group().rstrip(":") + else: + correct = str(record.id) + SEQ = str(record.seq) + if correct in wanted_set: + out.write(">" + correct + "\n" + SEQ + "\n") + +############################################################ +# MAIN PROGRAM # +############################################################ +print "\n~~~~~~~~~~" +print "pal_filter" +print "~~~~~~~~~~" +print "Version: " + __version__ +time.sleep(1) +print "\nFind the optimum loci in your pal_finder output and increase "\ + "the rate of successful microsatellite marker development" +print "\nSee Griffiths et al. (currently unpublished) for more details......" +time.sleep(2) # Get values for all the required and optional arguments @@ -95,257 +148,188 @@ parser.add_argument('-p','--pal_finder', help='Output from pal_finder ', \ required=True) -parser.add_argument('-assembly','--assembly_QC', help='Perform the PandaSeq \ - based QC', nargs='?', const=1, type=int, required=False) +parser.add_argument('-assembly', help='Perform the PandaSeq based QC', \ + action='store_true') parser.add_argument('-a','--skip_assembly', help='If the assembly has already \ - been run, skip it with -a', nargs='?', const=1, \ - type=int, required=False) + been run, skip it with -a', action='store_true') parser.add_argument('-c','--skip_conversion', help='If the fastq to fasta \ conversion has already been run, skip it with -c', \ - nargs='?', const=1, type=int, required=False) + action='store_true') -parser.add_argument('-primers','--filter_by_primer_column', help='Filter \ +parser.add_argument('-primers', help='Filter \ pal_finder output to just those loci which have primers \ - designed', nargs='?', const=1, type=int, required=False) + designed', action='store_true') -parser.add_argument('-occurrences','--filter_by_occurrences_column', \ +parser.add_argument('-occurrences', \ help='Filter pal_finder output to just loci with primers \ - which only occur once in the dataset', nargs='?', \ - const=1, type=int, required=False) + which only occur once in the dataset', action='store_true') -parser.add_argument('-rankmotifs','--filter_and_rank_by_motif_size', \ +parser.add_argument('-rankmotifs', \ help='Filter pal_finder output to just loci which are a \ perfect repeat unit. Also, rank the loci by motif size \ - (largest first)', nargs='?', const=1, type=int, \ - required=False) - -args = vars(parser.parse_args()) - -# parse arguments - -R1_input = args['input1']; -R2_input = args['input2']; -pal_finder_output = args['pal_finder']; -perform_assembly = args['assembly_QC'] -skip_assembly = args['skip_assembly']; -skip_conversion = args['skip_conversion']; -filter_primers = args['filter_by_primer_column']; -filter_occurrences = args['filter_by_occurrences_column']; -filter_rank_motifs = args['filter_and_rank_by_motif_size']; + (largest first)', action='store_true') -# set default values for arguments -if perform_assembly is None: - perform_assembly = 0 -if skip_assembly is None: - skip_assembly = 0 -if skip_conversion is None: - skip_conversion = 0 -if filter_primers is None: - filter_primers = 0 -if filter_occurrences is None: - filter_occurrences = 0 -if filter_rank_motifs is None: - filter_rank_motifs = 0 - -############################################################ -# Function List # -############################################################ - -# Reverse complement a sequence - -def ReverseComplement1(seq): - seq_dict = {'A':'T','T':'A','G':'C','C':'G'} - return "".join([seq_dict[base] for base in reversed(seq)]) +parser.add_argument('-v', '--get_version', help='Print the version number of \ + this pal_filter script', action='store_true') -# Convert a .fastq to a .fasta, filter to just lines we want -# and strip MiSeq barcodes - -def fastq_to_fasta(file): - file_name = os.path.splitext(os.path.basename(file))[0] - with open(file_name + "_filtered.fasta", "w") as out: - for record in SeqIO.parse(file, "fastq"): - ID = str(record.id) - SEQ = str(record.seq) - if ID in wanted: - out.write(">" + ID + "\n" + SEQ + "\n") - -# strip the miseq barcodes from a fasta file +args = parser.parse_args() -def strip_barcodes(file): - file_name = os.path.splitext(os.path.basename(file))[0] - with open(file_name + "_adapters_removed.fasta", "w") as out: - for record in SeqIO.parse(file, "fasta"): - match = re.search(r'\S*:', record.id) - if match: - correct = match.group().rstrip(":") - else: - correct = str(record.id) - SEQ = str(record.seq) - if correct in wanted: - out.write(">" + correct + "\n" + SEQ + "\n") - -############################################################ -# MAIN PROGRAM # -############################################################ -print "\n~~~~~~~~~~" -print "pal_filter" -print "~~~~~~~~~~\n" -time.sleep(1) -print "\"Find the optimum loci in your pal_finder output and increase "\ - "the rate of successful microsatellite marker development\"" -print "\nSee Griffiths et al. (currently unpublished) for more details......" -time.sleep(2) - -if (perform_assembly == 0 and filter_primers == 0 and filter_occurrences == 0 \ - and filter_rank_motifs == 0): +if not args.assembly and not args.primers and not args.occurrences \ + and not args.rankmotifs: print "\nNo optional arguments supplied." print "\nBy default this program does nothing." print "\nNo files produced and no modifications made." print "\nFinished.\n" exit() - else: print "\n~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" print "Checking supplied filtering parameters:" print "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" time.sleep(2) - if filter_primers == 1: + if args.get_version: + print "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" + print "pal_filter version is " + __version__ + " (03/03/2016)" + print "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\n" + if args.primers: print "-primers flag supplied." print "Filtering pal_finder output on the \"Primers found (1=y,0=n)\"" \ " column." print "Only rows where primers have successfully been designed will"\ " pass the filter.\n" time.sleep(2) - if filter_occurrences == 1: + if args.occurrences: print "-occurrences flag supplied." - print "Filtering pal_finder output on the \"Occurences of Forward" \ - " Primer in Reads\" and \"Occurences of Reverse Primer" \ + print "Filtering pal_finder output on the \"Occurrences of Forward" \ + " Primer in Reads\" and \"Occurrences of Reverse Primer" \ " in Reads\" columns." print "Only rows where both primers occur only a single time in the"\ " reads pass the filter.\n" time.sleep(2) - if filter_rank_motifs == 1: + if args.rankmotifs: print "-rankmotifs flag supplied." print "Filtering pal_finder output on the \"Motifs(bases)\" column to" \ " just those with perfect repeats." print "Only rows containing 'perfect' repeats will pass the filter." print "Also, ranking output by size of motif (largest first).\n" time.sleep(2) + # index the raw fastq files so that the sequences can be pulled out and # added to the filtered output file - -# Indexing input sequence files print "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" print "Indexing FastQ files....." print "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" -R1fastq_sequences_index = SeqIO.index(R1_input,'fastq') -R2fastq_sequences_index = SeqIO.index(R2_input,'fastq') +R1fastq_sequences_index = SeqIO.index(args.input1,'fastq') +R2fastq_sequences_index = SeqIO.index(args.input2,'fastq') print "Indexing complete." # create a set to hold the filtered output wanted_lines = set() # get lines from the pal_finder output which meet filter settings - # read the pal_finder output file into a csv reader -with open (pal_finder_output) as csvfile_infile: +with open (args.pal_finder) as csvfile_infile: csv_f = csv.reader(csvfile_infile, delimiter='\t') - header = csv_f.next() - with open(os.path.splitext(os.path.basename(pal_finder_output))[0] + \ - ".filtered", 'w') as csvfile_outfile: -# write the header line for the output file - csvfile_outfile.write('\t'.join(header) + "\tR1_Sequence_ID\t" - "R1_Sequence\tR2_Sequence_ID\tR2_Sequence\n") + header = csv_f.next() + header.extend(("R1_Sequence_ID", \ + "R1_Sequence", \ + "R2_Sequence_ID", \ + "R2_Sequence" + "\n")) + with open( \ + os.path.splitext(os.path.basename(args.pal_finder))[0] + \ + ".filtered", 'w') as csvfile_outfile: + # write the header line for the output file + csvfile_outfile.write('\t'.join(header)) for row in csv_f: -# get the sequence ID + # get the sequence ID seq_ID = row[0] -# get the raw sequence reads and convert to a format that can -# go into a tsv file + # get the raw sequence reads and convert to a format that can + # go into a tsv file R1_sequence = R1fastq_sequences_index[seq_ID].format("fasta").\ replace("\n","\t",1).replace("\n","") R2_sequence = R2fastq_sequences_index[seq_ID].format("fasta").\ replace("\n","\t",1).replace("\n","") seq_info = "\t" + R1_sequence + "\t" + R2_sequence + "\n" -# navigate through all different combinations of filter options -# if the primer filter is switched on - if filter_primers == 1: -# check the occurrences of primers field + # navigate through all different combinations of filter options + # if the primer filter is switched on + if args.primers: + # check the occurrences of primers field if row[5] == "1": -# if filter occurrences of primers is switched on - if filter_occurrences == 1: -# check the occurrences of primers field + # if filter occurrences of primers is switched on + if args.occurrences: + # check the occurrences of primers field if (row[15] == "1" and row[16] == "1"): -# if rank by motif is switched on - if filter_rank_motifs == 1: -# check for perfect motifs + # if rank by motif is switched on + if args.rankmotifs: + # check for perfect motifs if row[1].count('(') == 1: -# all 3 filter switched on -# write line out to output + # all 3 filter switched on + # write line out to output csvfile_outfile.write('\t'.join(row) + \ seq_info) - else: csvfile_outfile.write('\t'.join(row) + seq_info) - elif filter_rank_motifs == 1: + elif args.rankmotifs: if row[1].count('(') == 1: csvfile_outfile.write('\t'.join(row) + seq_info) else: csvfile_outfile.write('\t'.join(row) + seq_info) - elif filter_occurrences == 1: + elif args.occurrences: if (row[15] == "1" and row[16] == "1"): - if filter_rank_motifs == 1: + if args.rankmotifs: if row[1].count('(') == 1: csvfile_outfile.write('\t'.join(row) + seq_info) else: csvfile_outfile.write('\t'.join(row) + seq_info) - elif filter_rank_motifs == 1: + elif args.rankmotifs: if row[1].count('(') == 1: csvfile_outfile.write('\t'.join(row) + seq_info) else: csvfile_outfile.write('\t'.join(row) + seq_info) # if filter_rank_motifs is active, order the file by the size of the motif -if filter_rank_motifs == 1: +if args.rankmotifs: rank_motif = [] ranked_list = [] # read in the non-ordered file and add every entry to rank_motif list - with open(os.path.splitext(os.path.basename(pal_finder_output))[0] + \ - ".filtered") as csvfile_ranksize: + with open( \ + os.path.splitext(os.path.basename(args.pal_finder))[0] + \ + ".filtered") as csvfile_ranksize: csv_rank = csv.reader(csvfile_ranksize, delimiter='\t') header = csv_rank.next() for line in csv_rank: rank_motif.append(line) -# open the file ready to write the ordered list - with open(os.path.splitext(os.path.basename(pal_finder_output))[0] + \ - ".filtered", 'w') as rank_outfile: + # open the file ready to write the ordered list + with open( \ + os.path.splitext(os.path.basename(args.pal_finder))[0] + \ + ".filtered", 'w') as rank_outfile: rankwriter = csv.writer(rank_outfile, delimiter='\t', \ lineterminator='\n') rankwriter.writerow(header) count = 2 while count < 10: for row in rank_motif: -# count size of motif + # count size of motif motif = re.search(r'[ATCG]*',row[1]) if motif: the_motif = motif.group() -# rank it and write into ranked_list + # rank it and write into ranked_list if len(the_motif) == count: ranked_list.insert(0, row) count = count + 1 -# write out the ordered list, into the .filtered file + # write out the ordered list, into the .filtered file for row in ranked_list: rankwriter.writerow(row) print "\n~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" print "Checking assembly flags supplied:" print "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" -if perform_assembly == 0: +if not args.assembly: print "Assembly flag not supplied. Not performing assembly QC.\n" -if perform_assembly == 1: - print "-assembly flag supplied: Performing PandaSeq assembly quality checks." +if args.assembly: + print "-assembly flag supplied: Perform PandaSeq assembly quality checks." print "See Fox et al. (currently unpublished) for full details on the"\ " quality-check process.\n" time.sleep(5) @@ -355,8 +339,9 @@ motif = [] F_primers = [] R_primers = [] - with open(os.path.splitext(os.path.basename(pal_finder_output))[0] + \ - ".filtered") as input_csv: + with open( \ + os.path.splitext(os.path.basename(args.pal_finder))[0] + \ + ".filtered") as input_csv: pal_finder_csv = csv.reader(input_csv, delimiter='\t') header = pal_finder_csv.next() for row in pal_finder_csv: @@ -369,132 +354,141 @@ wanted = set() for line in seqIDs: wanted.add(line) - -# Assemble the paired end reads into overlapping contigs using PandaSeq -# (can be skipped with the -a flag if assembly has already been run -# and the appropriate files are in the same directory as the script, -# and named "Assembly.fasta" and "Assembly_adapters_removed.fasta") -# -# The first time you riun the script you MUST not enable the -a flag.t -# but you are able to skip the assembly in subsequent analysis using the -# -a flag. + """ + Assemble the paired end reads into overlapping contigs using PandaSeq + (can be skipped with the -a flag if assembly has already been run + and the appropriate files are in the same directory as the script, + and named "Assembly.fasta" and "Assembly_adapters_removed.fasta") - if skip_assembly == 0: - pandaseq_command = 'pandaseq -A pear -f ' + R1_input + ' -r ' + \ - R2_input + ' -o 25 -t 0.95 -w Assembly.fasta' + The first time you riun the script you MUST not enable the -a flag.t + but you are able to skip the assembly in subsequent analysis using the + -a flag. + """ + if not args.skip_assembly: + pandaseq_command = 'pandaseq -A pear -f ' + args.input1 + ' -r ' + \ + args.input2 + ' -o 25 -t 0.95 -w Assembly.fasta' subprocess.call(pandaseq_command, shell=True) - strip_barcodes("Assembly.fasta") + strip_barcodes("Assembly.fasta", wanted) print "\nPaired end reads been assembled into overlapping reads." - print "\nFor future analysis, you can skip this assembly step using \ - the -a flag, provided that the assembly.fasta file is \ - intact and in the same location." + print "\nFor future analysis, you can skip this assembly step using" \ + " the -a flag, provided that the assembly.fasta file" \ + " is intact and in the same location." else: print "\n(Skipping the assembly step as you provided the -a flag)" - -# Fastq files need to be converted to fasta. The first time you run the script -# you MUST not enable the -c flag, but you are able to skip the conversion -# later using the -c flag. Make sure the fasta files are in the same location -#and do not change the filenames - - if skip_conversion ==0: - fastq_to_fasta(R1_input) - fastq_to_fasta(R2_input) + """ + Fastq files need to be converted to fasta. The first time you run the script + you MUST not enable the -c flag, but you are able to skip the conversion + later using the -c flag. Make sure the fasta files are in the same location + and do not change the filenames + """ + if not args.skip_conversion: + fastq_to_fasta(args.input1, wanted) + fastq_to_fasta(args.input2, wanted) print "\nThe input fastq files have been converted to the fasta format." - print "\nFor any future analysis, you can skip this conversion step \ - using the -c flag, provided that the fasta files \ - are intact and in the same location." + print "\nFor any future analysis, you can skip this conversion step" \ + " using the -c flag, provided that the fasta files" \ + " are intact and in the same location." else: print "\n(Skipping the fastq -> fasta conversion as you provided the" \ " -c flag).\n" -# get the files and everything else we will need - -# Assembled fasta file + # get the files and everything else needed + # Assembled fasta file assembly_file = "Assembly_adapters_removed.fasta" -# filtered R1 reads - R1_fasta = os.path.splitext(os.path.basename(R1_input))[0] + \ - "_filtered.fasta" -# filtered R2 reads - R2_fasta = os.path.splitext(os.path.basename(R2_input))[0] + \ - "_filtered.fasta" - - outputfilename = os.path.splitext(os.path.basename(R1_input))[0] - -# parse the files with SeqIO + # filtered R1 reads + R1_fasta = os.path.splitext( \ + os.path.basename(args.input1))[0] + "_filtered.fasta" + # filtered R2 reads + R2_fasta = os.path.splitext( \ + os.path.basename(args.input2))[0] + "_filtered.fasta" + outputfilename = os.path.splitext(os.path.basename(args.input1))[0] + # parse the files with SeqIO assembly_sequences = SeqIO.parse(assembly_file,'fasta') R1fasta_sequences = SeqIO.parse(R1_fasta,'fasta') -# create some empty lists to hold the ID tags we are interested in + # create some empty lists to hold the ID tags we are interested in assembly_IDs = [] fasta_IDs = [] -# populate the above lists with sequence IDs + # populate the above lists with sequence IDs for sequence in assembly_sequences: assembly_IDs.append(sequence.id) for sequence in R1fasta_sequences: fasta_IDs.append(sequence.id) -# Index the assembly fasta file + # Index the assembly fasta file assembly_sequences_index = SeqIO.index(assembly_file,'fasta') R1fasta_sequences_index = SeqIO.index(R1_fasta,'fasta') R2fasta_sequences_index = SeqIO.index(R2_fasta,'fasta') -# prepare the output file - with open (outputfilename + "_pal_filter_assembly_output.txt", 'w') \ - as outputfile: -# write the headers for the output file - outputfile.write("readPairID\t Forward Primer\t F Primer Position in " - "Assembled Read\t Reverse Primer\t R Primer Position in " - "Assembled Read\t Motifs(bases)\t Assembled Read ID\t " - "Assembled Read Sequence\t Raw Forward Read ID\t Raw " - "Forward Read Sequence\t Raw Reverse Read ID\t Raw Reverse " - "Read Sequence\n") + # prepare the output file + with open ( \ + outputfilename + "_pal_filter_assembly_output.txt", 'w') \ + as outputfile: + # write the headers for the output file + output_header = ("readPairID", \ + "Forward Primer",\ + "F Primer Position in Assembled Read", \ + "Reverse Primer", \ + "R Primer Position in Assembled Read", \ + "Motifs(bases)", \ + "Assembled Read ID", \ + "Assembled Read Sequence", \ + "Raw Forward Read ID", \ + "Raw Forward Read Sequence", \ + "Raw Reverse Read ID", \ + "Raw Reverse Read Sequence\n") + outputfile.write("\t".join(output_header)) -# cycle through parameters from the pal_finder output + # cycle through parameters from the pal_finder output for x, y, z, a in zip(seqIDs, F_primers, R_primers, motif): if str(x) in assembly_IDs: # get the raw sequences ready to go into the output file assembly_seq = (assembly_sequences_index.get_raw(x).decode()) -# fasta entries need to be converted to single line so sit nicely in the output - assembly_output = assembly_seq.replace("\n","\t") + # fasta entries need to be converted to single line so sit + # nicely in the output + assembly_output = assembly_seq.replace("\n","\t").strip('\t') R1_fasta_seq = (R1fasta_sequences_index.get_raw(x).decode()) R1_output = R1_fasta_seq.replace("\n","\t",1).replace("\n","") R2_fasta_seq = (R2fasta_sequences_index.get_raw(x).decode()) R2_output = R2_fasta_seq.replace("\n","\t",1).replace("\n","") assembly_no_id = '\n'.join(assembly_seq.split('\n')[1:]) -# check that both primer sequences can be seen in the assembled contig + # check that both primer sequences can be seen in the + # assembled contig if y or ReverseComplement1(y) in assembly_no_id and z or \ ReverseComplement1(z) in assembly_no_id: if y in assembly_no_id: -# get the positions of the primers in the assembly to predict fragment length + # get the positions of the primers in the assembly + # (can be used to predict fragment length) F_position = assembly_no_id.index(y)+len(y)+1 if ReverseComplement1(y) in assembly_no_id: - F_position = assembly_no_id.index(ReverseComplement1(y)\ - )+len(ReverseComplement1(y))+1 + F_position = assembly_no_id.index( \ + ReverseComplement1(y))+len(ReverseComplement1(y))+1 if z in assembly_no_id: R_position = assembly_no_id.index(z)+1 if ReverseComplement1(z) in assembly_no_id: - R_position = assembly_no_id.index(ReverseComplement1(z)\ - )+1 - -# write everything out into the output file - output = (str(x) + "\t" + y + "\t" + str(F_position) \ - + "\t" + (z) + "\t" + str(R_position) \ - + "\t" + a + "\t" + assembly_output \ - + R1_output + "\t" + R2_output + "\n") - outputfile.write(output) + R_position = assembly_no_id.index( \ + ReverseComplement1(z))+1 + output = (str(x), + str(y), + str(F_position), + str(z), + str(R_position), + str(a), + str(assembly_output), + str(R1_output), + str(R2_output + "\n")) + outputfile.write("\t".join(output)) print "\nPANDAseq quality check complete." print "Results from PANDAseq quality check (and filtering, if any" \ " any filters enabled) written to output file" \ - " ending \"_pal_filter_assembly_output.txt\".\n\n" - + " ending \"_pal_filter_assembly_output.txt\".\n" print "Filtering of pal_finder results complete." print "Filtered results written to output file ending \".filtered\"." print "\nFinished\n" else: - if (skip_assembly == 1 or skip_conversion == 1): + if args.skip_assembly or args.skip_conversion: print "\nERROR: You cannot supply the -a flag or the -c flag without \ also supplying the -assembly flag.\n" - print "\nProgram Finished\n" diff -r e1a14ed7a9d6 -r cb56cc1d5c39 test-data/illuminaPE_assembly.out --- a/test-data/illuminaPE_assembly.out Wed Feb 24 08:25:17 2016 -0500 +++ b/test-data/illuminaPE_assembly.out Mon Mar 21 06:52:43 2016 -0400 @@ -1,2 +1,2 @@ -readPairID Forward Primer F Primer Position in Assembled Read Reverse Primer R Primer Position in Assembled Read Motifs(bases) Assembled Read ID Assembled Read Sequence Raw Forward Read ID Raw Forward Read Sequence Raw Reverse Read ID Raw Reverse Read Sequence +readPairID Forward Primer F Primer Position in Assembled Read Reverse Primer R Primer Position in Assembled Read Motifs(bases) Assembled Read ID Assembled Read Sequence Raw Forward Read ID Raw Forward Read Sequence Raw Reverse Read ID Raw Reverse Read Sequence ILLUMINA-545855:49:FC61RLR:2:1:19063:1614 1 1 AT(14) AT(14) AT(14) AT(14) >ILLUMINA-545855:49:FC61RLR:2:1:19063:1614 TATATATATATATACACATATATATATATATTTTTTACATTATTTCACTTCGCCCAAACTAGAGAGTCTAACAAAGTACAACCCAGCATATTAAAGTTCATCTCAGTTTTGTTCTGAAATGAGAAAAAAATATATATATATATGTTTATATATATATATA >ILLUMINA-545855:49:FC61RLR:2:1:19063:1614 TATATATATATATACACATATATATATATATTTTTTACATTATTTCACTTCGCCCAAACTAGAGAGTCTAACAAAGTACAACCCAGCATATTAAAGTTCATCTCAGTTTTGTTCTG >ILLUMINA-545855:49:FC61RLR:2:1:19063:1614 TATATATATATATAAACATATATATATATATTTTTTTCTCATTTCAGAACAAAAGTGAGATGAACTTTAATATGGTGGGGTGTATTTTGAGAGACTCTCTAGTTTGGGAGGAGTGA diff -r e1a14ed7a9d6 -r cb56cc1d5c39 test-data/illuminaPE_assembly_after_filters.out --- a/test-data/illuminaPE_assembly_after_filters.out Wed Feb 24 08:25:17 2016 -0500 +++ b/test-data/illuminaPE_assembly_after_filters.out Mon Mar 21 06:52:43 2016 -0400 @@ -1,1 +1,1 @@ -readPairID Forward Primer F Primer Position in Assembled Read Reverse Primer R Primer Position in Assembled Read Motifs(bases) Assembled Read ID Assembled Read Sequence Raw Forward Read ID Raw Forward Read Sequence Raw Reverse Read ID Raw Reverse Read Sequence +readPairID Forward Primer F Primer Position in Assembled Read Reverse Primer R Primer Position in Assembled Read Motifs(bases) Assembled Read ID Assembled Read Sequence Raw Forward Read ID Raw Forward Read Sequence Raw Reverse Read ID Raw Reverse Read Sequence